IGP Commands
configure rip rxmode
configure rip rxmode [none | v1only | v2only | any] {vlan [<vlan name> |
all]}
Description
Changes the RIP receive mode for one or more VLANs.
Syntax Description
none
v1only
v2only
any
vlan name
all
Default
Any.
Usage Guidelines
If no VLAN is specified, the setting is applied to all VLANs.
Example
The following command configures the receive mode for the VLAN finance to accept only RIP version 1
format packets:
configure rip rxmode v1only finance
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
This command was modified in ExtremeWare 7.2e to support the
Platform Availability
This command is available on all platforms.
1838
Specifies to drop all received RIP packets.
Specifies to accept only RIP version 1 format packets.
Specifies to accept only RIP version 2 format packets.
Specifies to accept RIP version 1 and RIP version 2 packets.
Specifies to apply settings to specific VLAN name.
Specifies all VLANs.
keyword.
all
ExtremeWare 7.7 Command Reference Guide