Configure Rip Delete Vlan - Extreme Networks ExtremeWare Command Reference Manual

configure rip delete vlan

configure rip delete vlan [<vlan name> | all]
Description
Disables RIP on an IP interface.
Syntax Description
vlan name
all
Default
All. If no VLAN is specified, then all is assumed.
Usage Guidelines
When an IP interface is created, RIP configuration is disabled on the interface by default. When the RIP
interface is disabled, the parameters are not reset to default automatically.
Example
The following command deletes RIP on a VLAN named finance:
configure rip delete finance
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
configure rip delete vlan
1835