Figure 4-137 Installing The Lamp Cover; Figure 4-138 Installing The Light Guide Sheet - Toshiba Satellite Pro M10 Series Maintenance Manual

4 Replacement Procedures
2. Seat the lamp cover on the backlight unit and secure it with two screws.
V
Screw
Detail of V
3. Install the light guide sheet in the backlight unit.
Insert the light guide sheet straight
to avoid deforming any sheets.
4-160
4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
Tighten the screws with 1.0kgf•cm of torque.
Align the holes on the lamp cover
with the pins on the frame.

Figure 4-137 Installing the lamp cover

Light guide sheet

Figure 4-138 Installing the light guide sheet

Backlight unit
Lamp cover
Insert three tabs on the edge of
the light guide sheet into the notches
3
on the frame as ordered in
this illutration.
Satellite Pro M10 Series Maintenance Manual (960-431)
W
Screw
Detail of W
1
2