Toshiba Satellite Pro M10 Series Maintenance Manual page 367

4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
3. Remove five screws from the side of the LCD module.
Screw
Screw
4. Turn the LCD module right side up.
5. Remove the top frame. When you remove it, wear gloves or finger guards to avoid
staining or damaging the LCD panel.
Release four latches securitng
the top frame with the lamp cover
Satellite Pro M10 Series Maintenance Manual (960-431)
Loosen the screws
with 1.0 kgf•com of torque.
Figure 4-128 Removing the screws
Figure 4-129 Removing the top frame
4 Replacement Procedures
Screw
Screw
Screw
Release the U-shaped side of
the top frame.
Top frame
qSide view r
Release the latch securing the top frame
with the P-chassis
4-155