4 Replacement Procedures
4
s
4.22 Display Mask
Removing the Display Mask
To remove the display mask, follow the steps below and refer to Figures 4-44 and 4-45.
1. Remove two mask seals at the bottom corners of the display assembly.
2. Remove two M2.5×6 black flat-head screws securing the display mask.
NOTE: Support the display with your hand when you remove the screws.
Figure 4-44 Removing the screws on the display mask
4-64
Mask seals
Satellite Pro M10 Series Maintenance Manual (960-431)
4.22 Display Mask
M2.5 6 black flat-head screws