Toshiba Satellite Pro M10 Series Maintenance Manual page 192

3 Tests and Diagnostics
(b) HDD Priority
This option enables to select the priority for the Built-in HDD, optional
second HDD or PC card.
Built-in HDD → Second HDD → PC Card (Default)
Second HDD → Built-in HDD → PC Card
Built-in HDD → PC Card → Second HDD
Second HDD → PC Card → Built-in HDD
PC Card → Built-in HDD → Second HDD
PC Card → Second HDD → Built-in HDD
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE
RPL
7. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
NOTE: When starting the computer in Resume mode, the last configuration is
remembered. If data does not appear on the display you are using after starting in
Resume mode, pressing Fn+F5.
Pressing Fn+F5 changes the display setting in the order of internal LCD to
simultaneous to external monitor.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled
Disabled
3-86
Sets to PXE protocol
Sets to PRL protocol
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor
for simultaneous display.
Enables the LCD display stretch feature. (Default)
Disables the LCD display stretch feature.
Satellite Pro M10 Series Maintenance Manual (960-431)
(Default)
3.28 SETUP