Figure 4-125 Applying The Protective Cover-S - Toshiba Satellite Pro M10 Series Maintenance Manual

4 Replacement Procedures
17. Apply the protective cover-S.
Align the cover's edge with the edge of the plastic part of the connector
Make sure that the amount of displacement is 0.5 mm or less.
Align the cover's edge
with the PCB's edge.
0 to 1 mm
Apply the cover's edge close to the screw.
(both right and left)
4-152
4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43)
Apply the cover along the top frame
and fold the cover to the side.

Figure 4-125 Applying the protective cover-S

The edge of the plastic part of the connector
Satellite Pro M10 Series Maintenance Manual (960-431)