Connector Check And Replacement Check - Toshiba Satellite Pro M10 Series Maintenance Manual
Portable personal computer
Hide thumbs
Also See for Satellite Pro M10 Series:
- User manual (249 pages) ,
- Replacement manual (24 pages) ,
- Brochure & specs (10 pages)
Table of Contents
Advertisement
2.6 HDD Troubleshooting
Procedure 5
Connector Check and Replacement Check
The HDD or the system board may be disconnected or damaged. Disassemble the computer
following the steps described in Chapter 4, Replacement Procedures and perform the following
checks:
Check 1
Make sure the HDD is firmly connected to PJ1509 on the system board.
If the connections are loose, reconnect firmly and repeat Procedure 1. If there is still
an error, go to Check 2.
Check 2
The HDD may be damaged. Replace it with a new one following the instructions in
Chapter 4. If the problem still exists, perform Check 3.
Check 3
The system board may be damaged. Replace it with a new one following the
instructions in Chapter 4.
Satellite Pro M10 Series Maintenance Manual (960-431)
HDD
PJ1509
2 Troubleshooting Procedures
System board
2-37
Advertisement
Chapters
Table of Contents
Troubleshooting
