4.21 USB Board
4.21 USB Board
Removing the USB Board
To remove the USB board, follow the steps below and refer to Figure 4-43.
1. Remove one M2×4 screw securing the USB board.
2. Remove the USB board.
Installing the USB Board
To install the USB board, follow the steps below and refer to Figure 4-43.
1. Seat the USB board and secure it with one M2×4 screw.
Satellite Pro M10 Series Maintenance Manual (960-431)
USB board
Figure 4-43 Removing the USB board
4 Replacement Procedures
M2 4 screw
4-63