4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
12. Secure five M2×2 screws on the side of the module.
Screw
Screw
13. Apply the protective cover-G.
Satellite Pro M10 Series Maintenance Manual (960-431)
Tighten the screws with 1.0 kgf•cm of torque.
Figure 4-145 Securing the screws
Figure 4-146 Applying the protective cover-G
4 Replacement Procedures
Screw
Screw
Screw
Align the edge of the cover
with the edge of the G-PWB
Protective cover-G
4-165