Installing The Slim Select Bay Module - Toshiba Satellite Pro M10 Series Maintenance Manual

4.4 Slim Select Bay Module

Installing the Slim Select Bay Module

To install the slim select bay module, follow the steps below and refer to Figures 4-9 and 4-
10.
1. Seat the ODD in the ODD bracket.
2. Secure the ODD bracket to the ODD with five M2×3 thin silver flat-head screws.
3. Connect the ODD interface board to the ODD.
4. Seat the connector cover and secure it to the ODD with two M2×8 black screws.
5. Insert the module into the slim select bay and press it gently until the latch clicks.
6. Set one M3×4 black flat-head screw in the lock position, if necessary.
Satellite Pro M10 Series Maintenance Manual (960-431)
4 Replacement Procedures
4-21