1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. M10-S405
  6. User manual

Toshiba M10-S405 User Manual

M10-s405 user's guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Satellite Pro
M10/M15 Series
User's Guide
If you need assistance:
❖
InTouch
Calling within the United States (800) 457-7777
Calling from outside the United States (949) 859-4273
For more information, see Chapter 9 on page
TOSHIBA
®
Center
®
203
of this guide.
C6637-0203M1

Advertisement

Table of Contents
loading

Related Manuals for Toshiba M10-S405

Summary of Contents for Toshiba M10-S405

  • Page 1 M10/M15 Series User’s Guide If you need assistance: ® ❖ InTouch Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see Chapter 9 on page TOSHIBA Center ® of this guide. C6637-0203M1...
  • Page 2 DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER DAMAGE RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED.
  • Page 3 : Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the...

  • Page 4: Industry Canada Requirement

    This device may not cause harmful interference. ❖ This device must accept any interference received, including interference that may cause undesired operation. Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.

  • Page 5: Type Of Service

    FCC. In the event repairs are ever needed on your modem, they should be performed by Toshiba Corporation or an authorized representative of Toshiba Corporation. Disconnection If you should ever decide to permanently disconnect your modem from its present line, please call the telephone company and let them know of this change.

  • Page 6: Fax Branding

    Fax branding The Telephone Consumer Protection Act of 1991 makes it unlawful to use a computer or other electronic device to send any message via a telephone fax machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity or individual sending the message and the telephone number of the sending machine or such business,...

  • Page 7: Wireless Interoperability

    USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...

  • Page 8: Wireless Lan And Your Health

    Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
  • Page 9 The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met. IC: 248H-DPA3233W This device has been designed to operate with an antenna having a maximum gain of 4.8 d. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada.
  • Page 10 L’utilisation en extérieur est autorisé sur le canal 10 (2457 MHz) et 11 (2462 MHz). Dans le cas d’une utilisation privée, a l’extérieur d’un bâtiment, audessus d’un espace public, aucun enregistrement n’est nécessaire pour une distance de moins de 300m. Pour une distance supérieure à...
  • Page 11 Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen.
  • Page 12 Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co- channel Mobile Satellite systems.

  • Page 13: Device Authorization

    This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...

  • Page 14: Interference Statement

    ❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
  • Page 15 Approved Countries for use This equipment is approved to the radio standard by the countries in Fig.1. Australia Canada Germany Japan New Zealand Switzerland Greece Poland Caution: Do not use this equipment except in the countries in Fig.1. CD-ROM, DVD-ROM, and Multifunction drive safety instructions The CD-ROM, DVD-ROM and Multifunction drives employ a laser system.
  • Page 16 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
  • Page 17 EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES BETWEEN THE PRODUCT AND THE MANUAL.
  • Page 18 Dolby - Manufactured by Toshiba under license from Dolby Laboratories/Dolby and the double-D symbol are trademarks of Dolby Laboratories. ™ Bluetooth is a trademark owned by its proprietor and used by Toshiba under license. All other brand and product names are trademarks or registered trademarks of their respective companies.

  • Page 19: Table Of Contents

    Contents Introduction... 27 This guide... 28 Safety icons... 28 Other icons used... 29 Other documentation... 30 Service options... 30 Chapter 1: Finding Your Way Around... 31 Making sure you have everything... 31 Front with the display panel closed... 32 Back... 33 Right side...
  • Page 20 Scrolling with the TouchPad™... 60 Control buttons... 60 Disabling or enabling the Dual Point Device... 61 Setting up your software... 62 Registering your computer with Toshiba... 63 Setting up other devices... 63 Turning off the computer... 63 Closing the display panel... 64 Using external display devices...
  • Page 21 Connecting external speakers or headphones... 73 Connecting a microphone... 73 Using an optional expansion device... 74 Chapter 3: Learning the Basics... 75 Computing tips... 75 Using the keyboard... 77 Character keys ... 77 Making your keyboard emulate a full-size keyboard... 77 Ctrl, Fn, and Alt keys...
  • Page 22 Powering down the computer... 99 Using Turn Off Computer or Shut Down... 100 Using Hibernation... 103 Using Standby... 105 Toshiba’s online resources... 107 Chapter 4: Mobile Computing... 109 Toshiba’s energy-saver design... 109 Running the computer on battery power... 110 Battery Notice... 110 Safety Precautions...
  • Page 23 Using an optional expansion device... 132 Chapter 6: Enhancing Productivity... 133 Exploring the desktop... 133 Finding your way around the desktop... 133 Exchanging data with another computer... 136 Transferring files... 136 Getting help transferring files... 137 Setting up for communications... 137 Connecting the modem to a telephone line...
  • Page 24 Removing an SD Using the i.LINK Connecting your modem to a telephone line... 160 Connecting to a phone line... 160 Chapter 7: Toshiba Utilities... 162 Fn-esse Starting Fn-esse Using the keyboard or pointing device to assign keys 165 Viewing existing key assignments... 166 Changing or removing existing key assignments ...
  • Page 25 Setting a hard disk drive user only password in System Setup... 185 Deleting or changing a hard disk drive user only password in System Setup... 186 Setting a hard disk drive master and user password in System Setup... 187 Changing the master and user passwords in System Setup...
  • Page 26 Develop good computing habits... 233 If you need further assistance... 234 Before you call... 234 Contacting Toshiba... 234 Other Toshiba Internet Web sites ... 235 Toshiba’s worldwide offices... 236 Appendix A: Hot Keys... 239 Appendix B: Power Cable Connectors... 247 Glossary...

  • Page 27: Introduction

    Introduction Welcome to the world of powerful, portable multimedia computing. With your Toshiba notebook computer, your work can accompany you wherever you go. ® Satellite Pro M10/M15 Series computers provide considerable computing power, enabling you to perform the most demanding computing tasks from any location.

  • Page 28: This Guide

    This guide This guide This guide introduces the computer’s features. You can: ❖ Read the entire guide from beginning to end ❖ Skim through and stop when a topic interests you ❖ Use the table of contents and the index to find specific information If you are new to computers or have not used a notebook computer before, read through this chapter to familiarize yourself with the...

  • Page 29: Other Icons Used

    CAUTION: This icon indicates the existence of a hazard that could result in damage to equipment or property if the safety instruction is not observed. NOTE: This icon indicates information that relates to the safe operation of the equipment or related items. Other icons used Additional icons highlight other helpful or educational information:...

  • Page 30: Other Documentation

    ❖ The Microsoft which explains the features of the operating system. Service options Toshiba offers a full line of service options built around its ™ SelectServ Toshiba’s Web site at toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong”...

  • Page 31: Chapter 1: Finding Your Way Around

    Before you do anything else, consult the Quick Start card shipped with your computer to make sure you received everything. If any items are missing or damaged, notify your authorized Toshiba representative or your network administrator immediately. For additional help, see Wrong” on page “If Something Goes...

  • Page 32: Front With The Display Panel Closed

    Finding Your Way Around Making sure you have everything Front with the display panel closed Infrared port Wireless antenna on/off switch* The wireless antenna on/off switch (functional only on systems with a wireless module installed) lets you turn on a Wi-Fi or Bluetooth module on your system.

  • Page 33: Back

    Back Video-out port DC IN USB 2.0 ports DC IN—Lets you plug in the AC adapter. USB 2.0 ports—The USB (Universal Serial Bus) ports provide a connection for USB 2.0 peripherals. DEFINITION: USB 2.0 is a peripheral expansion standard that supports a data-transfer rate of up to 480 Mbps for peripherals such as keyboards, pointing devices, and monitors.

  • Page 34: Right Side

    Modem port—Lets you connect the computer’s internal modem directly to a conventional telephone line. For more detailed information regarding your system's V.92 modem, visit the Toshiba web site at toshiba.com. Network port (RJ45 jack)—Provides access to a LAN via Ether standard Ethernet Cooling vents—Provide ventilation to keep the computer’s...

  • Page 35: Left Side

    Left side Speaker Security lock slot Speaker—Lets you hear stereo sound from a CD or DVD, in addition to system alarms and audible warnings associated with your software. Security lock slot—Lets you attach the optional PORT-Noteworthy secure it to a large, heavy object such as your desk. i.Link port—Provides very fast data transfer rates of up to 400 mega bits per second (Mbps).

  • Page 36: Underside

    Finding Your Way Around Making sure you have everything ® card slot—Lets you insert SD storage. PC Card eject buttons—Allow easy removal of PC Cards. Microphone jack—Lets you connect an external microphone or other audio input device to the computer. Headphone jack—Lets you connect stereo headphones or other audio-output devices, such as external speakers, to the computer.

  • Page 37: Keyboard And Display Features

    Battery pack—Lets you use your computer when a standard electrical outlet is not available. For further information about using the battery, see on page 110. Slim SelectBay which offer exceptional system flexibility. For more information, “Using Slim SelectBay® modules” on page Slim SelectBay secure in its compartment.
  • Page 38 Finding Your Way Around Keyboard and display features Opening the display panel Adjust the display panel to a comfortable viewing angle. CAUTION: To avoid damaging the display panel, be careful when opening and closing it. Never force the panel beyond the point where it moves easily, and never use it to lift the computer.
  • Page 39 Finding Your Way Around Keyboard and display features Power button —The power button is used to turn on power to the computer. For more information, see “Different ways to turn the computer on and off” on page Screen—The computer’s screen is a liquid crystal display (LCD) that provides clear, sharp images.

  • Page 40: Indicator Panel Lights

    Finding Your Way Around Keyboard and display features Indicator panel lights This panel is located on the front of the computer. AC power light—Glows green when the computer is connected to an AC power source. On/off light—Indicates whether the computer is on, off, or in a Standby power down mode.

  • Page 41: Keyboard Indicator Panel Lights

    Slim SelectBay indicator light—Indicates the status of a secondary battery in the Slim SelectBay, if installed. ❖ Glows amber when the battery is charging. ❖ Glows green when the battery is fully charged. ❖ Does not glow if there is no battery in the Slim SelectBay. Wireless indicator light—Glows amber when the wireless antenna on/off switch is in the on position.

  • Page 42: System Buttons

    Internet button System buttons The Internet button launches your default Internet browser. The TOSHIBA Console button allows quick access to various functions. The TV out button activates an external display device such as a TV when connected to the video out port.

  • Page 43: Chapter 2: Getting Started

    Chapter 2 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.

  • Page 44: Keeping Yourself Comfortable

    AC power source and let it dry out completely before turning it on again. If the computer does not operate properly after you turn it back on, contact a Toshiba service representative or your network administrator. ❖...

  • Page 45: Placement Of The Computer

    This section provides hints on avoiding strain and stress injuries. For more information, consult books on ergonomics, repetitive- strain injury, and repetitive-stress syndrome. Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer.
  • Page 46 Getting Started Selecting a place to work ❖ Position your chair so that the keyboard is at or slightly lower than the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor.

  • Page 47: Other Precautions

    Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency. ❖...

  • Page 48: Setting Up Your Computer

    Getting Started Setting up your computer CAUTION: Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is used extensively. Overheating of a PC Card can result in errors or instability in the PC Card operation. Be careful when you remove a PC Card that has been used for lengthy periods of time.

  • Page 49: Connecting To A Power Source

    Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter. When you connect the AC adapter to the computer, always follow the steps in the exact order as described in the User's Manual.
  • Page 50 Getting Started Setting up your computer DANGER: Hold the power cable by its plug when you connect/disconnect it. Do NOT pull the cable itself. Doing so may damage the power cable and result in a short circuit or electric shock. To connect AC power to the computer: Connect the power cable to the AC adapter.

  • Page 51: Charging The Battery

    If the main battery is present, the battery light ❖ Amber while the battery is charging ❖ Green when the battery is fully charged If the battery light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving input from the AC power supply.

  • Page 52: Adding Memory

    Adding memory HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit toshiba.com Your Satellite Pro enough memory to run most of today’s popular applications. You may want to increase the computer’s memory if you use complex software or process large amounts of data.
  • Page 53 Click Turn Off. The operating system turns off the computer. Unplug and remove any cables connected to the computer. Remove the battery. Close the display panel and turn the computer upside down to locate the expansion memory slot cover to the memory slot. Locating the memory slot cover Using a standard Phillips no.
  • Page 54 Getting Started Adding memory Put the screws and the cover in a safe place so that you can retrieve them later. CAUTION: Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer.

  • Page 55: Removing A Memory Module

    CAUTION: Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. Replace the cover plate and the screws. Turn the computer over and restart it. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory.

  • Page 56: Checking Total Memory

    Getting Started Adding memory Pull the clips away from the memory module. The memory module pops partially out of the slot. Pulling the clips away from the memory module Carefully remove the module from the slot. Replace the cover plate and screws. Turn the computer over and restart it.

  • Page 57: Turning On The Computer

    Turning on the computer The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right. Lift the display panel. CAUTION: To avoid damaging the display panel, do not force it beyond the point where it moves easily, and never lift the computer by the display panel.

  • Page 58: Using The Accupoint Ii ® Pointing Device

    Getting Started Using the AccuPoint II For the meaning of each light on the system indicator panel, “Indicator panel lights” on page The preinstalled operating system will load automatically. CAUTION: When you turn on the computer for the first time, don’t turn off the power again until the operating system has loaded completely.

  • Page 59: Using The Touchpad

    HINT: If you would rather use a mouse or trackball, you can connect one to the computer’s USB ports. For information, “Using a mouse” on page To move the cursor, gently push the AccuPoint II pointing device in the direction you want the cursor to move. Pushing harder on the AccuPoint II pointing device moves the cursor faster.

  • Page 60: Scrolling With The Touchpad

    Getting Started Using the TouchPad™ NOTE: Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction. Once you’ve positioned your cursor, you can either click it into place by double-tapping the TouchPad or clicking the control buttons.

  • Page 61: Disabling Or Enabling The Dual Point Device

    Disabling or enabling the Dual Point Device The Dual Point Device is enabled by default. To change the enable/disable Dual Point setting: Click Start, Control Panel. The Control Panel window appears. Click Printers and Other Hardware. Click Mouse Properties. The Mouse Properties window appears. Click the Dual Pointing Device tab.

  • Page 62: Setting Up Your Software

    Toshiba and Microsoft. Click Yes to register, or No to exit the process. NOTE: If you click No, you may register with Toshiba by clicking the Register with Toshiba icon on the desktop. Enter your personal information in the registration window.

  • Page 63: Registering Your Computer With Toshiba

    Enter your name and click Finish to complete the process. Your computer restarts automatically. Registering your computer with Toshiba To register your computer with Toshiba at a time later than when you first start your computer, you may also click on the desktop icon to do so electronically.

  • Page 64: Closing The Display Panel

    Getting Started Turning off the computer ❖ If you have work in progress and are not connected to a network, use the Windows Standby or Hibernate commands to save your system settings to memory so that, when you turn on the computer again, you will automatically return to where you left off.

  • Page 65: Using External Display Devices

    Using external display devices Your computer comes with a built-in LCD display, but you can also connect three different types of external display devices to one of two available video ports: ❖ A television via the video-out port. TECHNICAL NOTE: In the Windows you don’t need an Internet connection to watch cable or broadcast TV, but you must purchase a compatible TV tuner card.

  • Page 66: Selecting Video Cables

    For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.

  • Page 67: Directing The Display Output When You Turn On The Computer

    TECHNICAL NOTE: If you are connecting to a television, you may need to change the display properties. Most televisions use or support an 800 x 600 standard resolution. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen.

  • Page 68: Adjusting The Quality Of The External Display

    Getting Started Using external display devices ❖ Built-in display and TV (or other external video device) simultaneously (only when in dual controller mode) ❖ TV (or other external video device) only Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box.

  • Page 69: Video Limitations

    Video limitations Keep in mind that the quality of the display will be limited to the capabilities of the external video device. ❖ If the external video device, such as an SVGA monitor, is capable of displaying at a maximum resolution of 640 x 480 and your system is set for a higher resolution, only part of the desktop will appear on the screen.

  • Page 70: Making Your External Keyboard Emulate The Fn Key

    , you will probably miss these features when using an external keyboard. Don’t worry: you can use a key combination on the external keyboard to emulate the key combination through the Windows Control Panel Toshiba HWSetup icon. For more information about Hardware Setup, see “Toshiba Hardware Settings” on page Using a mouse You may want to use a mouse instead of the computer’s built-in...
  • Page 71 NOTE: You must supply the proper printer cable. If one did not come with your printer, you may purchase one from an electronics or computer store. If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable. CAUTION: Your printer documentation may require you to install the printer software before physically connecting the printer to your computer.

  • Page 72: Connecting An Optional External Diskette Drive

    Getting Started Connecting an optional external diskette drive See your printer documentation for additional configuration steps. NOTE: Some printers use USB to connect. For more information on setting up your printer, see printer” on page For more information on getting your printer to print, see “Printing your work”...

  • Page 73: Connecting External Speakers Or Headphones

    Connecting external speakers or headphones Connecting an optional external USB diskette drive Connecting external speakers or headphones To attach an external stereo output device: Locate the headphone jack on the front of the computer. Using any necessary adapters, plug the cable from the external audio device into the headphone jack.

  • Page 74: Using An Optional Expansion Device

    When you return, you can quickly connect your computer and have immediate access to all the devices. Toshiba offers a port replicator for the Satellite Pro Series. If you connect a 2-button USB mouse or a 3-button USB...

  • Page 75: Chapter 3: Learning The Basics

    Chapter 3 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
  • Page 76 Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It’s easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.

  • Page 77: Using The Keyboard

    Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows functionality of a full-size keyboard. Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The space bar creates a space character instead of just passing over an area of the page.

  • Page 78: Ctrl, Fn, And Alt Keys

    Learning the Basics Using the keyboard Your computer’s keyboard has only one Most of the time, this doesn’t matter. However, some programs assign separate functions to the right and left the regular and numeric pad Using the ❖ Press right side of the enhanced keyboard. ❖...

  • Page 79: Windows Special Keys

    Windows special keys The Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse (or AccuPoint II) button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
  • Page 80 Learning the Basics Using the keyboard Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on.

  • Page 81: Starting A Program

    To use the numeric overlay keys while the cursor control overlay is ❖ Hold down ❖ To return to the cursor control overlay, release To disable the cursor control overlay, hold down the press again. The cursor control mode light on the keyboard indicator panel goes out.

  • Page 82: Starting A Program From Windows ® Explorer

    Learning the Basics Starting a program The Windows Programs menu, which lists programs and program groups. If your program is listed, go to Step 3, otherwise, continue with Step 2. Point to the program group, in this example, Accessories. The Accessories menu is displayed. Click the program, in this example, WordPad.

  • Page 83: Starting A Program From The Run Dialog Box

    In the left part of the window, click Windows NT. Click Accessories. Windows folder on the right side of the window. In the right part of the window, double-click WordPad. The operating system opens WordPad. To close the program, click the Close button in the upper- right corner of the program’s window.

  • Page 84: Saving Your Work

    Learning the Basics Saving your work ❖ If you do not know the location, click Browse... In the Browse dialog box, enter the file name (for example, wordpad.exe) and select the drive to search. When the operating system has found the file, click Open.

  • Page 85: File Names

    Use this dialog box to specify where to store the document and to give it a file name. A sample Save As dialog box Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.

  • Page 86: Printing Your Work

    Learning the Basics Printing your work You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % & { } ( ) @ and ‘. MS-DOS names are not case-sensitive and must not contain spaces. Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format.

  • Page 87: Using The Dvd-Rom Or Multifunction Drive

    Using the DVD-ROM or Multifunction drive A sample Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Using the DVD-ROM or Multifunction drive Optical storage has become the preferred medium for software, music, and video.
  • Page 88 Learning the Basics Using the DVD-ROM or Multifunction drive If a DVD-ROM drive or Multifunction drive is not currently installed in the Slim SelectBay, follow the instructions in Slim SelectBay® modules” on page HINT: Your DVD-ROM or Multifunction drive is designed to play Region 1 (North America) DVD-ROMs.

  • Page 89: Cd/Dvd Control Buttons

    Using the DVD-ROM or Multifunction drive CD/DVD control buttons The control buttons above the computer keyboard enable you to play CDs and DVDs when the computer is on. CD/DVD Digital audio CD/DVD control buttons above the keyboard The CD/DVD button launches the appropriate media player for the media inserted in the DVD-ROM or Multifunction drive (Windows Media Player for audio CDs and WinDVD for DVD movies), and begins to play the audio CD or DVD movie.

  • Page 90: Inserting Compact Discs

    Learning the Basics Using the DVD-ROM or Multifunction drive Inserting compact discs To insert a compact disc into the drive: Make sure the computer is turned on. Make sure the in-use indicator light is off. Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch).
  • Page 91 Make sure the disc is completely on the spindle and is lying flat on the tray. CAUTION: If you insert the disc incorrectly, it may jam the drive. If this happens, contact your Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.

  • Page 92: Removing Compact Discs

    Learning the Basics Using the DVD-ROM or Multifunction drive Removing compact discs To remove a compact disc (CD or DVD) with the computer turned Press the eject button on the drive. CAUTION: Do not press the eject button while the in-use indicator light is glowing.

  • Page 93: Using Pc Cards

    ❖ Do not expose discs to direct sunlight or extreme heat or cold. ❖ To clean a disc that is dirty, wipe it with a clean, dry cloth. The most efficient method to clean it is to start from the center of the disc and wipe toward the outward edge (not in a circle).

  • Page 94: Using Sd ® (Secure Digital) Cards

    Learning the Basics Using SD ❖ Do not remove a SCSI card while any of the SCSI devices connected to it are operating. Before removing a PC Card, stop it by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove.

  • Page 95: Using Your Computer At The Office

    Using your computer at the office By connecting an external monitor, external full-size keyboard, and a mouse, you can work with your notebook as if it were a standard office computer. If you are using an external keyboard and want to use the function keys, refer to keyboard emulate the Fn key”...

  • Page 96: Caring For Your Computer

    Never use harsh or caustic chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. 110.

  • Page 97: Moving The Computer

    Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer, through the accessories information packaged with your system, or visit toshiba.com...

  • Page 98: Restoring Your Work

    Learning the Basics Preparing for communications HINT: Backing up all the files on your hard disk takes a considerable amount of time and many diskettes. You may prefer to use a high-capacity backup system, such as an external tape drive. Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program.

  • Page 99: Different Ways To Turn The Computer On And Off

    Different ways to turn the computer on and off Different ways to turn the computer on and off Instead of turning on your computer by pressing the power button, you can: ❖ Set the computer to turn on automatically at a time you designate.

  • Page 100: Using Turn Off Computer Or Shut Down

    Learning the Basics Powering down the computer You can set the computer to turn on automatically at a time you designate. This option is helpful for transferring files by modem at night. You can set the computer to turn on and send or receive the files while you are asleep.

  • Page 101: Shutting Down More Quickly

    Toshiba’s Power Saver utility. Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. In the Running on batteries section, select Scheme, click the Details button, then the System Power Mode tab. Select the options you want from the drop-down lists.
  • Page 102 Click OK again, then close the Control Panel. NOTE: For more information about the Power Saver utility, “Toshiba Power Saver utility” on page Starting again after Shut down To start the computer up again, press the power button until the on/ off light changes to green.

  • Page 103: Using Hibernation

    Configuring your computer for Hibernation Open the Start menu, click Control Panel then Performance and Maintenance. Click the Toshiba Power Saver icon. In the Running on batteries area, select Scheme and click Details. Click the System Power Mode tab.
  • Page 104 The computer is now set to automatically go into Hibernation when your option settings occur. NOTE: For more information about the Power Saver utility, “Toshiba Power Saver utility” on page Once the computer is configured, put the computer into Hibernation mode by either pressing the power button or closing the display panel, depending on the hibernation options taken.

  • Page 105: Using Standby

    Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the on/off light turns green. The computer returns to the screen you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.

  • Page 106: Going Into Standby Mode More Quickly

    Toshiba’s Power Saver utility. Open the Start menu, click Control Panel then Performance and Maintenance. Click the Toshiba Power Saver icon. In the Running on batteries area, click the Details button, then select the System Power Mode tab. Select Standby for the options you want.
  • Page 107 Click OK. Click OK again, then close the Control Panel. NOTE: For more information about the Power Saver utility, “Toshiba Power Saver utility” on page Starting again from Standby mode To start up the computer from Standby mode, press the power button until the on/off light changes to green.

  • Page 108: Toshiba's Online Resources

    Learning the Basics Toshiba’s online resources Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.

  • Page 109: Chapter 4: Mobile Computing

    It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods of time while traveling.

  • Page 110: Running The Computer On Battery Power

    Mobile Computing Running the computer on battery power Running the computer on battery power The computer contains a removable lithium ion (Li-ion) battery pack that provides power when you are away from an AC outlet. This is the main battery. You can recharge it many times. TECHNICAL NOTE: For optimum DVD performance, always play DVDs while your computer is connected to AC power.

  • Page 111: Safety Precautions

    ❖ To replace the main battery, use an identical battery that you can purchase through toshiba.com. ❖ Reverse Polarity should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity.

  • Page 112: Maximizing Battery Life

    Mobile Computing Running the computer on battery power Maximizing battery life To maximize the life of your battery pack: ❖ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges.

  • Page 113: Charging The Batteries

    Charging the batteries To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. The main battery light ( charged, and glows green when it is fully charged. The battery may not start charging immediately under the following conditions: ❖...
  • Page 114 To show remaining power: Open the Start menu, click Control Panel then Performance and Maintenance. Click the Toshiba Power Saver icon. The Toshiba Power Saver Properties dialog box appears. ). When the on/off light flashes amber, it ) with ®...
  • Page 115 Running the computer on battery power Sample Toshiba Power Saver Properties Dialog Box The Power Save Modes tab displays the remaining amount of time for each of the different power usage modes. With repeated discharges and recharges, the battery’s capacity will gradually decrease.

  • Page 116: What To Do When The Battery Alarm Sounds

    To change the default alarm settings: Open the Start menu, click Control Panel then Performance and Maintenance. Click the Toshiba Power Saver icon. Select the appropriate Running on Batteries option. Click the Details... button. Select the Alarms tab and adjust the settings to suit your needs.

  • Page 117: Changing Batteries

    ❖ Install a secondary battery pack in the computer’s Slim SelectBay. ❖ Connect your computer to an AC power source. Changing batteries CAUTION: When handling battery packs, do not drop or knock them. Also be careful not to damage the casing or short- circuit the terminals.
  • Page 118 Mobile Computing Changing batteries Removing the discharged battery WARNING: If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in page 119. Wipe the terminals of the charged battery with a clean cloth to ensure a good connection.

  • Page 119: Disposing Of Used Batteries

    If not, check with your local government for information on where to recycle or dispose of old batteries. Only use replacement batteries recommended by Toshiba. CAUTION: The computer uses a lithium ion battery, which can explode if not handled or disposed of properly. Putting spent batteries in the trash is not only irresponsible, it may also be illegal.

  • Page 120: Power Usage Modes In Windows Xp

    Toshiba has combined these options into preset power usage modes. Using one of these modes lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.

  • Page 121: Using A Hot Key To Set The Power Usage Mode

    The power usage mode under AC power is Full Power only. Release the The pop-up window disappears. You’re now in the selected mode. For more information on setting the battery power usage mode, “Toshiba Power Saver utility” on page simultaneously to display the power usage , press key. Mobile Computing...

  • Page 122: Additional Options For Power

    Depending on the amount of time you spend away from external power sources, the capacity of one battery pack may be sufficient for your needs. However, if you need more portable power, Toshiba provides these options: ❖ Purchase extra battery packs.

  • Page 123: Chapter 5: Expansion Options

    Chapter 5 Expansion Options Your computer is designed to work in the office as well as on the road. This chapter explains how to set up the various optional devices so that your notebook can provide all the convenience of a traditional desktop computer.

  • Page 124: Connecting External (Optional) Devices

    Expansion Options Devices for office computing ❖ Expansion devices Some are Toshiba devices, others are standard computer components. The devices manufactured by Toshiba can be purchased through Toshiba’s Web site: accessories information packaged with your computer. Connecting external (optional) devices...

  • Page 125: Using An External Keyboard

    Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s USB ports supports any USB- compatible keyboard. NOTE: To use the alternate Setup, the computer must be docked and a PS/2 keyboard must be connected to the docking port.

  • Page 126: Using A Printer

    Expansion Options Using a printer Using a printer Before you can connect a printer, you must determine whether it requires a parallel, infrared, or a USB interface. Check the printer’s documentation. If you can configure the printer as either a serial or a parallel device, set it up for parallel operation.

  • Page 127: Setting Up Your Printer

    To the computer Identifying the ends of a parallel printer cable Plug the printer’s power cable into a live electrical outlet. See your printer documentation for additional configuration steps. For more information on getting your printer to print, see “Printing your work” on page Setting up your printer Setting up a printer involves selecting a printer driver.
  • Page 128 Expansion Options Using a printer Sample Printers and Faxes window Click Add Printer. The Add Printer Wizard appears. Sample Add Printer Wizard dialog box Click Next.
  • Page 129 The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the ® Windows XP operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. If the printer you are setting up: ❖...
  • Page 130 Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. ™ Wireless LAN Mini PCI module ®...

  • Page 131: Using The Wi-Fi Wireless Lan Mini Pci Module

    When you return, you can quickly connect your computer and have immediate access to all the devices. For more information, see the accessories information package that comes with the device or visit Expansion Options Using an expansion device ™ Mini PCI module page toshiba.com...

  • Page 132: Using An Optional Expansion Device

    When you return, you can quickly connect your computer and have immediate access to all the devices. For more information, see the accessories information packaged with your computer, or visit the Web site: toshiba.com.

  • Page 133: Chapter 6: Enhancing Productivity

    Chapter 6 Enhancing Productivity In this chapter, you will explore some of the special features of ® your Satellite Exploring the desktop The desktop is the launching pad for everything you can do in the ® Windows XP Home or XP Professional operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
  • Page 134 Enhancing Productivity Exploring the desktop Icons Start button Sample Windows Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area.

  • Page 135: Start Button

    Internet Explorer — The Microsoft to the Internet. NOTE: If you place the cursor over an icon, a popup description of the file contents appears. Your desktop may contain other icons depending on your configuration. See Windows information on each icon and how to use it. Start button You use the Start button to: ❖...

  • Page 136: Exchanging Data With Another Computer

    Enhancing Productivity Exchanging data with another computer You can personalize the taskbar to include not only shortcut icons but also your favorite Internet URL addresses. DEFINITION: URL stands for Uniform Resource Locator, which is the address that defines the route to a file on the Web or any other Internet facility.

  • Page 137: Getting Help Transferring Files

    Exchanging data with another computer Set any specific options. Start the transfer. When you have finished transferring files, close the programs on both computers. Getting help transferring files Click Start, then Help and Support. Click the Index icon on the toolbar. In the dialog box, type Follow the online guide instructions.
  • Page 138 Enhancing Productivity Exchanging data with another computer If you’re having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it. To find out which port your modem is connected to: Open the Start menu, click Control Panel. Click Phone and Modem Options.

  • Page 139: Connecting The Modem To A Telephone Line

    Card or an optional Bluetooth information about wireless networking, refer to your wireless network device documentation or contact your authorized Toshiba service provider. Setting up the connection To set up an office connection, consult your network administrator for network settings and additional considerations.
  • Page 140 Enhancing Productivity Exchanging data with another computer To set up a dial-up connection, use the New Connection Wizard: Click Start and point to All Programs. Point to Accessories, then to Communications, and click New Connection Wizard. Enter the phone number of your network connection and let the program dial the number.

  • Page 141: Setting Up A Wireless Connection

    Exchanging data with another computer Setting up a wireless connection For information on how to set up a wireless connection, refer to your wireless networking device documentation or your network administrator. Using Wireless LAN Connectivity Your system may come with an optional wireless LAN module. This is a technology that expands wireless communication beyond networking equipment, and can connect many different kinds of electronic devices without the need for cables.

  • Page 142: An Overview Of Using The Internet

    ™ Your Wi-Fi computer system. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Provider. An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features, under these headings: ❖...

  • Page 143: Internet Service Providers

    connected to the Internet) that work together using a specific Internet protocol called Hypertext Transfer Protocol (HTTP). The World Wide Web offers information as text, images, audio, or video to be referenced from anywhere in the world. Special programs called Web browsers are specifically designed to work with HTTP.

  • Page 144: Surfing The Internet

    Enhancing Productivity An overview of using the Internet “Connecting your modem to a telephone line” on page 160. Start your Web browser. Have your modem dial the ISP’s telephone number, and establish a connection with the ISP’s computer. If you are using your computer at the office, then you probably connect to the Internet through your company’s network.

  • Page 145: Uploading And Downloading Files From The Internet

    ❖ Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real-time, one-on-one or in groups, by typing messages which are instantly viewed by others on their computer screens. ❖...

  • Page 146: Playing An Audio Cd

    Enhancing Productivity Exploring audio features Playing an audio CD Insert an audio CD and close the disc tray. The CD begins to play. If the computer is turned on, Windows Media the CD begins to play. You can use the Windows Media program to control the CD.

  • Page 147: Playing Cds Using Auto-Run

    ❖ To stop the CD, click the Stop button. WARNING: Before using headphones to listen to an audio CD, turn the volume dial down. Playing the CD with the volume set too high could damage your ears. Playing CDs using Auto-Run If you insert a CD into the DVD-ROM/Multifunction drive and the Auto-Run feature does not automatically start your disk, try launching the CD manually.

  • Page 148: Recording Sounds

    Enhancing Productivity Exploring audio features Recording sounds You may record sounds as .wav files by connecting an external microphone or other sound source to the microphone jack. DEFINITION: A .wav (pronounced “wave”) file is a Windows TECHNICAL NOTE: If you record MP3 files, you will only be able to play them on a device capable of playing MP3 files.

  • Page 149: Using External Speakers Or Headphones

    The Sound Recorder window displays the new sound file as a waveform. NOTE: You can only record 60 seconds at a time. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu. Adjusting recording quality The better the quality of the recording, the more disk space the sound file requires.

  • Page 150: Using Slim Selectbay ® Modules

    Multifunction drive with both CD-RW and DVD-ROM drive capabilities. ❖ Secondary battery ❖ Secondary hard disk drive (HDD) HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit ® modules toshiba.com...

  • Page 151: Removing A Module From The Slim Selectbay

    Removing a module from the Slim SelectBay NOTE: Use caution when lifting or turning your computer. Failure to do so may result in damage to components, such as cables, attached to your computer, or to the computer itself. Turn off the computer. You may also hot swap a module in the Slim SelectBay.

  • Page 152: Inserting A Module Into The Slim Selectbay

    Enhancing Productivity Inserting and removing hard drives Sliding the module out Inserting a module into the Slim SelectBay To install a module into the Slim SelectBay, simply slide the module all the way into the Slim SelectBay. Inserting and removing hard drives Your Satellite Pro capacities.
  • Page 153 Inserting and removing hard drives Removing the hard drive cover screw Pull the hard drive cover toward you and lift it out to expose the hard drive. Grasp the plastic tab on the exposed edge of the hard drive and pull it to remove the hard drive from the computer. Removing the hard drive from the computer Install the new hard drive by sliding it into the hard drive slot and pressing it firmly until it locks.

  • Page 154: Inserting And Removing Pc Cards

    Enhancing Productivity Inserting and removing PC Cards Inserting the new hard disk drive Replace the hard drive cover and tighten the screw removed in step 5 above. Inserting and removing PC Cards Your Satellite Pro stacked PC Card slots and supports three types of PC Cards: ❖...
  • Page 155 Inserting and removing PC Cards Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it. To insert a PC Card: Turn off the computer. You may also hot swap a PC Card.

  • Page 156: Removing A Pc Card

    Enhancing Productivity Inserting and removing PC Cards Locking the PC Card Removing a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove.

  • Page 157: Inserting And Removing Bluetooth™ Or Wi-Fi™ Modules

    Your system may come with an optional Bluetooth or Wi-Fi module. If you wish to insert or remove a Bluetooth or Wi-Fi module, contact a Toshiba Wireless Authorized Service Provider. Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them.

  • Page 158: Using Sd ® Cards

    Enhancing Productivity Using SD® cards ® Using SD cards Your computer supports the use of SD cards. The cards can be used with a variety of digital products: digital music players, cellular phones, PDAs, digital cameras, digital video camcorders, etc. ®...

  • Page 159: Removing An Sd ® Card

    ® Removing an SD To remove an SD Right-click the Safely Remove Hardware icon on the System tray. After the card is stopped, it is safe to remove. Press the card inward to release it. The card pops out slightly. Grasp the card, and pull it straight out.

  • Page 160: Connecting Your Modem To A Telephone Line

    ❖ Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s web site at toshiba.com. Connecting to a phone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
  • Page 161 Connecting your modem to a telephone line Connect the other end to the RJ11 wall jack. Connecting to a wall jack CAUTION: The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line.

  • Page 162: Chapter 7: Toshiba Utilities

    Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ® ❖ Fn-esse ❖...

  • Page 163: Fn-Esse

    239. You can assign any key that is not associated with a hot key or a keyboard overlay. ® Starting Fn-esse Click Start, point to All Programs, Toshiba Utilities, then click Fn-esse. The Fn-esse keyboard appears. Toshiba Utilities Fn-esse® ®...
  • Page 164 Toshiba Utilities Fn-esse® Sample Fn-esse window The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color.

  • Page 165: Using The Keyboard Or Pointing Device To Assign Keys

    Using the pointing device, move the cursor over the desired key in the Fn-esse window and press the secondary button. The Assignment Type dialog box appears. Sample Fn-esse assignment type dialog box Toshiba Utilities Fn-esse® key, then press the plus...

  • Page 166: Viewing Existing Key Assignments

    Toshiba Utilities Fn-esse® Making a direct key assignment Select Direct... to display the Add/Edit Command dialog box. Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click the Browse button to specify this information.

  • Page 167: Changing Or Removing Existing Key Assignments

    ❖ To remove the key assignment, click Clear. Toshiba Console The Toshiba Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, then click All Programs.

  • Page 168: Customizing Your Computer

    Toshiba Utilities Toshiba Console Sample Toshiba Console window The Toshiba Console offers three categories of features: ❖ Customizing Your Computer ❖ Network ❖ Security Customizing Your Computer The features available in this category are: ❖ Power Management ❖ Mouse ❖...

  • Page 169: Network

    The Power Management feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. To access Power Management through the Toshiba Console, double-click the Power Management icon. The Toshiba Power Saver Properties window appears.
  • Page 170 You can either use one of the preset modes or create and use your own customized mode. The preset modes cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function.
  • Page 171 Customizing a power mode Highlight the mode on the Power Save Modes window. Click Details... The Properties window for the selected mode opens with the General tab displayed. Toshiba Utilities Toshiba Console Enter...

  • Page 172: Mouse Utility

    Mouse utility The Mouse utility allows you to change your mouse settings. To access the Mouse utility through the Toshiba Console, double- click the Mouse icon. Hotkey utility The hotkey utility allows you to receive a confirmation message...

  • Page 173: Mobile Extension Service

    The Warm Undock service allows you to dock or to remove the computer from the Port Replicator without turning the computer off. Toshiba Mobile Extensions will provide two selections in the Start menu when the computer is docked to the Port Replicator.
  • Page 174 Toshiba Utilities Toshiba Console Sample Toshiba HWSetup window The tabs represent various dialog boxes. They are: ❖ General—Allows you to view current BIOS, hard disk drive and memory settings ❖ Device Config — Shows the Device configuration options ❖ Parallel/Printer — Allows you to configure the parallel port default settings ❖...

  • Page 175: Mobile Extension

    Mobile Extension To adjust the settings for docking or using the Slim SelectBay, use the TOSHIBA Mobile Extension Service Configuration. To use the TOSHIBA Mobile Extension Service Configuration: Click Start, then Control Panel. Click Performance and Maintenance. Click TOSHIBA Mobile Extension.
  • Page 176 Toshiba Utilities Mobile Extension Sample Mobile Extension Service tab options Under the Bay Service tab, you can select behaviors like Hot Dock and Warm Dock for your Slim SelectBay. Sample SelectBay Service tab options For more information about expansion devices, see expansion device”...

  • Page 177: Toshiba Power Saver Utility

    Any options that you change become effective when you click either OK or Apply. Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings. You can enable hibernation through this utility.

  • Page 178: Setting User Passwords

    Setting a password leaves your computer secure so that nobody can access your files. You must enter the password before you can work on your computer. Toshiba supports the several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily ❖...

  • Page 179: Using An Instant Password

    If you have registered a user password, press your password then press If you enter the password correctly, the computer returns to where it was when you enabled the instant password. Toshiba Utilities Setting user passwords , then press . This freezes the...

  • Page 180: Setting A User Password

    To register a password for the power-on password functions: Click Start, the click All Programs. Point to Toshiba Console, then click the resulting Toshiba Console selection. You may also press the Toshiba Console button above the keyboard to open the Toshiba Console.

  • Page 181: Using A Supervisor Password

    To register a password for the power-on password functions: Click Start, the click All Programs. Point to Toshiba Console, then click the resulting Toshiba Console selection. You may also press the Toshiba Console button above the keyboard to open the Toshiba Console.
  • Page 182 Toshiba Utilities Using a supervisor password Sample Toshiba Console Security window Select the Supervisor Password icon. Click Set. Type your password in the Input box. Retype your password in the Input again box. Click Set. Click OK.

  • Page 183: Deleting A Supervisor Password

    Deleting a supervisor password To cancel the power-on password function: Click Start, the click All Programs. Point to Toshiba Console, then click the resulting Toshiba Console selection. You may also press the Toshiba Console button above the keyboard to open the Toshiba Console.

  • Page 184: Hard Disk Drive Passwords

    Toshiba Utilities Hard disk drive passwords Select Verify by Password. Type the correct password. Click Verify. Hard disk drive passwords Your computer comes with a System Setup utility that lets you set two types of hard disk drive passwords—user and master. These...

  • Page 185: Setting A Hard Disk Drive User Only Password In System Setup

    When System Setup prompts you to verify the password, type it again and press Hard disk drive passwords key and press and hold the power button . You may use any combination of letters and Enter Enter Toshiba Utilities...

  • Page 186: Deleting Or Changing A Hard Disk Drive User Only Password In System Setup

    Toshiba Utilities Hard disk drive passwords If the two passwords match, System Setup displays: Registered message appears. Repeat steps 6 and 7 to enter the password again. Press When System Setup prompts you to confirm your change, Press Deleting or changing a hard disk drive user only password in...

  • Page 187: Setting A Hard Disk Drive Master And User Password In System Setup

    Press the down arrow key to move to the Master Password section. You must register a Master Password first. Hard disk drive passwords twice. System Setup displays: Enter to save the change. key and press and hold the power button Toshiba Utilities Not Registered...

  • Page 188: Changing The Master And User Passwords In System Setup

    Toshiba Utilities Hard disk drive passwords Press the spacebar, then type a password of 1 to 16 characters and press numbers in your password. When System Setup prompts you to verify the password, type it again and press If the two passwords match, System Setup displays: for both User and Master passwords.

  • Page 189: Deleting The Hard Disk Drive Master And User Passwords In The System Setup

    Select the Master Password using the down arrow key. Hard disk drive passwords Enter . Note that you can only change (not delete) the user to save the change. key and press and hold the power button Toshiba Utilities...
  • Page 190 Toshiba Utilities Hard disk drive passwords Press the spacebar, the enter the master password and press Enter If you want to delete the master password, leave the space blank and press System Setup displays: also display as Press When System Setup prompts you to confirm your change, Press twice.

  • Page 191: Chapter 8: Windvd

    Chapter 8 WinDVD ™ WinDVD is a software program for playing DVDs. This chapter explains how to use this program. Playing DVDs TECHNICAL NOTE: For optimum DVD performance, play DVDs while your computer is connected to AC power. For systems with a DVD-ROM or multifunction drive, you can use WinDVD to play DVDs.
  • Page 192 WinDVD™ Playing DVDs Insert a DVD into the drive. The computer automatically detects the disc in the drive and will prompt you what to do. Sample DVD Drive Window NOTE: If you wish to have WinDVD run automatically, select Play DVD movie using WinDVD, then select the Always do the selected action checkbox.

  • Page 193: Using The Windvd Slider Bar (Location)

    WinDVD™ Playing DVDs Sample WinDVD video window with the control panel Using the WinDVD slider bar (location) The slider bar enables you to move forward or backward through the DVD content. Move the slider bar to the left to go backward or move it to the right to go forward.

  • Page 194: Using The Windvd Control Panel

    WinDVD™ Using the WinDVD control panel Using the WinDVD control panel The WinDVD control panel resembles the control panel of a standard home DVD player. TECHNICAL NOTE: The DVD author determines what features the DVD supports. Depending on the DVD format and your computer’s hardware configuration, some of the control panel features may be unavailable when playing a DVD.

  • Page 195: Using The Control Panel Playback Buttons

    From the WinDVD control panel, you can open an expanded control panel by clicking the expanded controls button. The expanded control panel contains several advanced features. See “Using WinDVD Advanced Features” on page 198 explanation of these features. Using the control panel playback buttons Once you have inserted a DVD and started WinDVD, you are ready to play the disc.
  • Page 196 WinDVD™ Using the WinDVD control panel Click this To do this Stop — Stops playback. Restart the movie by click- ing Play. Volume — Click and drag the slider up to increase vol- ume and down to decrease volume. Speed Ring — Enables you to control the speed at which the DVD plays.
  • Page 197 Using the WinDVD control panel Click this To do this Fast Rewind — Starts fast reverse movie playback. Fast Forward — Starts fast forward movie playback. Previous Chapter — Skip to the previous chapter in the movie. Next Chapter — Skip to the next chapter in the movie.

  • Page 198: Maximizing The Video Window

    WinDVD™ Using WinDVD Advanced Features Click this Maximizing the video window To close the WinDVD control panel and expand the video window to fill the screen, click the Maximize button. To display the control panel again, double-click anywhere in the video window.

  • Page 199: Using Playlists

    The features described in this section may be available on the WinDVD expanded control panel. To open the expanded control panel, click the expanded controls button on the WinDVD main control panel. Select from the following options: Navigation, Language, Display, Color, and Audio effect. Sample WinDVD with expanded subpanel Using playlists TECHNICAL NOTE: The DVD author determines what...

  • Page 200: Creating A Playlist

    WinDVD™ Using playlists can play the music selections you want in the order you want to hear them. You can only save one playlist at a time. NOTE: Some audio and video formats are not supported. Creating a Playlist To create a new playlist: Open the playlist menu by clicking the Playlist button.

  • Page 201: Playing A Playlist

    Select File to enable selection of a file, or Disc to create a playlist for an entire disc. Locate each file (you may select multiple files) for your playlist using the directory browser. Highlight the files and click Add, then OK to confirm your selection.

  • Page 202: Getting Help

    WinDVD™ Using playlists Sample Open Playlist dialog Locate the playlist you wish to open, then click Open. The Playlist window appears. Click Load List to open the saved playlists. Browse to the playlist you want to open then click Open and WinDVD displays the playlist.

  • Page 203: Chapter 9: If Something Goes Wrong

    This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
  • Page 204 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.

  • Page 205: Problems When You Turn On The Computer

    Problems when you turn on the computer Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start. Make sure you attached the AC adapter and power cable properly or installed a charged battery.

  • Page 206: The Windows® Operating System Is Not Working

    If Something Goes Wrong The Windows® operating system is not working The computer displays the The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours.

  • Page 207: Using Startup Options To Fix Problems

    The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. This section describes each option and when to use the procedure.

  • Page 208: Internet Problems

    If Something Goes Wrong The Windows® operating system is not working See your Windows TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.

  • Page 209: Resolving A Hardware Conflict

    Then do one or both of the following: ❖ In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions. ❖ Click a problem you would like help with from the listings and follow the on-screen instructions.

  • Page 210: Resolving Hardware Conflicts On Your Own

    If Something Goes Wrong Resolving a hardware conflict each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task.

  • Page 211: Fixing A Problem With Device Manager

    ❖ Disable another system component and use its resources for the new device, see Manager” on page ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.

  • Page 212: Checking Device Properties

    If Something Goes Wrong Resolving a hardware conflict Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device.

  • Page 213: Memory Problems

    Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, then click Turn off computer. Click Turn Off. The operating system shuts down and turns off the computer automatically.
  • Page 214 If Something Goes Wrong Resolving a hardware conflict The AC power light does not come on when you plug in the AC adapter and power cable. Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance.

  • Page 215: Keyboard Problems

    Check the power options using the Power Management utility. Have you added a device, such as a PC Card or memory module, that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts.
  • Page 216 If Something Goes Wrong Resolving a hardware conflict , type the password and press Enter key registered, press continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, hold the press twice.

  • Page 217: Disk Drive Problems

    Click Properties, and then the Settings tab. Change the Colors option and click OK. For more information, see Windows A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware.
  • Page 218 If Something Goes Wrong Resolving a hardware conflict You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are identifying the drive by its correct name (A: or C:). Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking:...
  • Page 219 Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer. Some programs run correctly but others do not.

  • Page 220: Dvd-Rom Or Multifunction Drive Problems

    If Something Goes Wrong Resolving a hardware conflict DVD-ROM or Multifunction drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean.
  • Page 221 Changes made to the system or its configuration may impact the playback performance of the WinDVD player. WinDVD controls are disabled. Controls may be grayed out by commands on the DVD disc. For example, it is common for DVD movie titles to disable fast- forward and rewind during the legal notices at the beginning of a movie.
  • Page 222 If Something Goes Wrong Resolving a hardware conflict Slow playback performance. DVD playback is a resource intensive application. Other applications and/or changes to your system hardware, software or configuration can impact playback performance. If playback is slower than normal, try: Closing any other open applications to improve the performance of the DVD playback.
  • Page 223 Minimum system requirements WinDVD performs best when these recommended components are present in your system: ❖ Sound card (with 48 KHz sampling rate support) ® ❖ DirectX 8.1 or higher (Source: Microsoft) ❖ DVD-ROM drive with DMA enabled (only available with Microsoft OSR 2.1 or above with PIXX 4.0 and USB support added) ❖...
  • Page 224 If Something Goes Wrong Resolving a hardware conflict Error message and additional information No audio subsystem could be found for playback. There is a problem with the audio card or audio compo- nent within the system. The problem may be one of the following: The audio card is faulty.
  • Page 225 Error message and additional information An unexpected error has occurred. This error is unclassified. Report the problem and any error code to your supplier's Technical Support. There is a problem with the copy protection system within the DVD-ROM or Multifunction drive. Play- back cannot continue.
  • Page 226 If Something Goes Wrong Resolving a hardware conflict Error message and additional information This DVD disc cannot be played in this region. The selected region cannot be used due to one of the following: The Region Code of WinDVD and the DVD disc do not match.

  • Page 227: Sound System Problems

    Error message and additional information This file appears to contain unsupported data. The drive or disc cannot be found. This may be caused by one of the following: No disc in the DVD-ROM or Multifunction drive. No DVD-ROM drive or Multifunction.

  • Page 228: Pc Card Problems

    If Something Goes Wrong Resolving a hardware conflict Mixer Utility (default Enabled), may cause feedback. Revert to the default settings. PC Card problems PC Cards (PCMCIA-compatible) include many types of devices, such as a removable hard disk, additional memory, or a pager. Most PC Card problems occur during installation and setup of new cards.
  • Page 229 PC Card checklist ❖ Make sure the card is inserted properly into the slot. “Using PC Cards” on page 93 how to insert PC Cards. ❖ Make sure all cables are securely connected. ❖ Occasionally a defective PC Card slips through quality control.
  • Page 230 If Something Goes Wrong Resolving a hardware conflict The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address.

  • Page 231: Printer Problems

    Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.

  • Page 232: Modem Problems

    If Something Goes Wrong Resolving a hardware conflict Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack.

  • Page 233: Develop Good Computing Habits

    Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.

  • Page 234: If You Need Further Assistance

    Consult the dealer from whom you purchased your computer and/or program. Your dealer is your best source for current information. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware-...

  • Page 235: Other Toshiba Internet Web Sites

    Start with accessing Toshiba on the Internet using any Internet browser by typing Toshiba voice contact Before calling Toshiba, make sure you have: ❖ Your computer’s serial number. ❖ The computer and any optional devices related to the problem. ❖...

  • Page 236: Toshiba's Worldwide Offices

    If Something Goes Wrong Toshiba’s worldwide offices Toshiba’s worldwide offices Australia Toshiba (Australia) Pty. Limited 84-92 Talavera Road North Ryde NSW 2113 Sydney Australia Belgium Toshiba Information Systems Benelux (Belgium) B.V. Excelsiorlaan 40 B-1930 Zaventem Belgium Czech Republic CHG Toshiba, s.r.o.
  • Page 237 800-457-7777 (within the US) outside of the US 949-859-4273 ( this call may incur long distance charges) Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF. 5249 6500 The Netherlands Toshiba Information Systems Benelux B.V.
  • Page 238 Ur. Quinta Grande 2720 Alfragide Portugal Slovakia HTC a.s. Dobrovicova 8 81109 Bratislava Slovakia Spain Toshiba Information Systems (España) S.A. Parque Empresarial San Fernando Edificio Europa, 1a Planta Escalera A 28831 (Madrid) San Fernando de Henares Spain Switzerland Ozalid AG Herostrasse 7 8048 Zürich...

  • Page 239: Appendix A: Hot Keys

    Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.

  • Page 240: Instant Password Security

    Hot Keys Instant password security Instant password security This hot key blanks the display. Without a password key combination turns off the display and activates instant security. Using the mouse or any key will make the display reappear. For information on setting a power-on password, see “Setting user passwords”...

  • Page 241: Power Usage Mode

    Sample power usage modes ® The power usage mode in the Windows operating system under AC power is Full Power only. The properties of each mode are set in the Toshiba Power Management utility. For more information, see “Mobile Computing” on page 109.

  • Page 242: Stand By Mode

    Hot Keys Stand By mode Stand By mode This hot key puts the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it doesn’t display. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Standby”...

  • Page 243: Hibernation Mode

    Hot Keys Hibernation mode Hibernation mode This hot key puts the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it doesn’t display.

  • Page 244: Display Modes

    Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window In o resolution of the internal display panel to match the resolution of the external display device. ❖...

  • Page 245: Display Brightness

    Display brightness This hot key decreases the screen brightness. This hot key increases the screen brightness. Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer (for systems with Wi-Fi only). The wireless modes are: Bluetooth module Wi-Fi enabled—This enables only the Wi-Fi module.

  • Page 246: Keyboard Hot Keys

    Hot Keys Disabling or enabling the Dual Point Device Disabling or enabling the Dual Point Device This hot key enables/disables the Dual Pointing Device. To use the TouchPad, see Point Device” on page Sample disable and enable Dual Pointing Device windows Keyboard hot keys This hot key turns the cursor control overlay on and off.

  • Page 247: Appendix B: Power Cable Connectors

    Appendix B Power Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...

  • Page 248: Glossary

    Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. alternating current BIOS basic input/output system bits per second compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS...
  • Page 249 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct current direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table...
  • Page 250 SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
  • Page 251 Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
  • Page 252 byte — A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory.
  • Page 253 Glossary controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
  • Page 254 disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive —...
  • Page 255 Glossary emulation — A technique in which a device or program imitates another device or program. enable — To turn on a computer option. See also disable. executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension.
  • Page 256 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
  • Page 257 Glossary interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device — See device. Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services.
  • Page 258 megabyte (MB) — A unit of data equal to 1,048,576 bytes (1024 x 1024 bytes). See also bytes. memory — Typically refers to the computer’s main memory, where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM.
  • Page 259 Glossary online — Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet. operating system —...
  • Page 260 program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date.
  • Page 261 Glossary serial — Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between the computer and an appropriate device. Compare parallel. shortcut —...
  • Page 262 Wi-Fi — A trademarked term by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity. Wi-Fi is another term for the IEEE 802.11b communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet.

  • Page 263: Index

    Index Numerics 101-key keyboard 77 AC adapter 49 DC IN 33 plugging in 33 AC power cable connectors 247 AC power light 40 accessories carrying cases 97 devices 150 docking solutions 74 memory 52 AccuPoint II 70 AccuPoint II pointing device 39 adapter, AC 33 Add Printer Wizard 127 adding memory 52...
  • Page 264 157 Bluetooth power switch 32 button power 39 start 135 buttons Internet 42 one-touch TV out 42 TOSHIBA Console 42 TV out 42 creating 147 playing an audio 146 playing using Auto-Run 147 problem solving 220 channels DMA 210...
  • Page 265 Device Manager 211 checking properties 212 disabling a device 211 devices keyboard 69 mouse 70 DirectX Foundation 223 disconnection modem 5 Disk Defragmenter 218 disk drive corrupted/damaged data files 219 missing files/trouble accessing a disk 218 running slow 218 diskette drive can’t insert a diskette 219 can’t read a diskette 219 connecting 72...
  • Page 266 Index external display, adjusting 68 external monitor not working 217 external speakers 73 CPU 34 FAT (File Allocation Table) 218 fax branding 6 FCC Notice “Declaration of Conformity Information” 3 FCC requirements 4 file extensions 86 file names 85 file, backing up 76 files backing up 97 printing 86...
  • Page 267 warning 28 icons, safety 28 indicator panel keyboard 39 system 39 indicator panel lights 40 Industry Canada requirement 4 infrared port 32 Installation 4 installation memory module 52 modem 4 installing memory modules 52 mouse 70 instant passwords, using 179 instructions for IC CS-03 certified equipment 6 interference statement 14...
  • Page 268 Index SelectBay indicator 41 light, wireless indicator 41 lighting 46 lights, indicator panel 40 lock PC Card 35 lock cable, PORT-Noteworthy computer 35 main battery light 40 make sure you have everything 31 Master password 184 memory adding 52 expansion slots 52 problem solving 213 removing expansion slot cover 53 memory module 37...
  • Page 269 PC Card checklist 229 CIS (Card Information Structure) computer stops working 230 configuring 157 errors 230 hot swapping 93 hot swapping fails 230 inserting 155 modem default 137 not recognized 230 problem solving 228 removing 156 setting up 157 using 93 PC Card lock 35 PC Card slot 35 plugged in 170...
  • Page 270 Index correctly 220 computer hangs when PC Card inserted 230 computer will not power up 205 contacting Toshiba 234 corrupted/damaged data files 219 Device Manager 211 disabling a device 211 disk drive is slow 218 display is blank 215 DVD-ROM...
  • Page 271 release battery 36 right side 34 RJ-11 jack 161 RJ45 jack 34 Run dialog box 83 safety icons 28 safety precautions battery disposal 119 saving files 84 screen 39 blank 215 doesn’t look normal/flickers 216 SD 158 SD card inserting 158 removing 159 SD card slot 36 SD cards 158...
  • Page 272 Toshiba Accessories information 30 Toshiba Console 167 TOSHIBA Console button 42 Toshiba Hardware Setup 173 Toshiba online resources 107 Toshiba Power Saver utility 177 Toshiba utilities 162 trademarks 18 transferring files 136 transferring information between computers 136 turning off the computer 63...
  • Page 273 Windows Start menu 81 Windows XP Help 208 Help and Support 208 problem solving 206 Windows XP Professional Briefcase Windows XP Professional taskbar 136 Windows® XP Professional desktop WinDVD advanced features 198 control panel 194 controls are disabled 221 error messages 223 help 202 not functioning properly 222 performance is poor 221...

This manual is also suitable for:

M10-s406M15-s405M15-s406Satellite pro m10 seriesSatellite pro m15 series

Table of Contents