4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
Installing the TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
To install the TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13), follow the steps below and
refer to Figures 4-136 to 4-147.
1. Install a new FL unit into the frame.
Cross section of Z—Z
NOTE: Be careful not to crease the reflective sheet when you install the FL unit.
Satellite Pro M10 Series Maintenance Manual (960-431)
Frame
Install the FL into the frame making sure
it does not stick out from the frame.
Let the reflective sheet inside the reflector
Fit the wire firmly into the groove
Figure 4-136 Installing the FL
4 Replacement Procedures
Z
Z
FL
4-159