Toshiba Satellite Pro M10 Series Maintenance Manual page 378

4 Replacement Procedures
14. Apply the protective cover-S, the aluminum tape and the wire-protective tape.
Wire-protective tape
Figure 4-147 Applying the protective cover-S and taps
4-166
4.34 TFT FL (Model 15.0 UXGA SHARP LQ150U1LW13)
Apply the protective cover-S along the top frame
and fold the cover to the side.
Secure the cable with wire-protective tape.
Be sure the cable lies flat.
0 1mm
'
Aluminum tape
0 ' 0.5m m
Align the edge of the tape
with the edge of the frame.
0 1mm
'
0 ' 1mm
Apply the aluminum tape around
the center of the module.
Satellite Pro M10 Series Maintenance Manual (960-431)
Protective cover-S
Align the holes on
the protective cover
with the pins on
the P-chassis.
Aluminum sheet