Installing The Touch Pad - Toshiba Satellite Pro M10 Series Maintenance Manual

4.11 Touch Pad
2. Hold the palm rest with both hands and then slightly bend it to release two latches
securing each sides of the touch pad cover. Be careful not to bend the palm rest
excessively, or it will be broken.
3. Remove the touch pad cover and touch pad.
4. Disconnect the pad cable from the connector on the touch pad.
Palm rest

Installing the Touch Pad

To install the touch pad, follow the steps below and refer to Figures 4-27 and 4-28.
1. Connect the pad cable to the connector on the touch pad.
2. Assemble the touch pad cover and touch pad, and then seat them to secure them
with four latches.
3. Secure the touch pad with two M2.5×5 black flat-head screws and two M2.5×4
screws.
Satellite Pro M10 Series Maintenance Manual (960-431)
Touch pad cover and
Touch pad
Figure 4-28 Removing the touch pad
4 Replacement Procedures
4-43