4.4 Slim Select Bay Module
4.4
Slim Select Bay Module
Removing the Slim Select Bay Module
To remove the slim select bay module, follow the steps below and refer to Figures 4-9 and 4-
10.
1. If a screw (M3×4 black flat-head screw) is set in the lock position, remove it.
2. Slide the latch toward the back of the computer to release it, and then pull the
module out of the slim select bay.
Slim select bay module
Satellite Pro M10 Series Maintenance Manual (960-431)
Figure 4-9 Removing the slim select bay module
4 Replacement Procedures
M3 4 black flat-head screws
Latch
Unlock position
Lock position
4-19