Toshiba Satellite Pro M10 Series Maintenance Manual page 327

4.30 TFT FL (Model 15.0 XGA LG. Philips LP150X06 A2)
Installing the TFT FL (Model 15.0 XGA LG. Philips LP150X06 A2)
To install the TFT FL (Model 15.0 LG. XGA Philips LP150X06 A2), follow the steps below
and refer to Figures 4-86 to 4-89.
1. Detach a protect film from Double Tape at the Cover Ass'y Bottom(L)
2. Assembly of Cover Ass'y bottom(L) and Screw. Maximum value of torque with
Screw should be below 2.0kgf.cm
3. Assembly of Light guide and Sheets. (Reflector Sheet fixing with one Double Tapes)
No penetration of foreign body is indispensable with no scratch on the surface of each
Sheet and Light guide.
4. Assembly of Tape adhesive used for Sheets fixing
5. Assembly of Board Ass'y. (Gate PCB fixing with Double Tape.) Pressure or stress
should not be given on PCB and TCP.
Figure 4-86 Assembly of Cover Ass'y bottom(L), Sheets, Light guide, Tape Adhesive and
Satellite Pro M10 Series Maintenance Manual (960-431)
Board Ass'y
4 Replacement Procedures
4-115