Wireless Lan Test (Agere) - Toshiba Satellite Pro M10 Series Maintenance Manual

3.16 Wireless LAN Test (Agere)

3.16 Wireless LAN Test (Agere)
This section describes how to perform the wireless LAN transmitting-receiving test with the
test program.
Note: Use another computer (with Agere wireless LAN card) that can communicate by the
wireless LAN as a reference machine to perform this test.
To start the Wireless LAN test program, follow the steps below:
Before starting the wireless LAN test, make sure the Wireless Communication
Note:
Switch on the left side of the computer is turned on. (The Wireless Communication
LED lights orange.)
Release the write-protection of the floppy disk for the test.
Insert a floppy disk containing the test program into the target machine and turn on the target
machine. The Wireless LAN test menu will appear.
#############################################################
####
#############################################################
*
*
*
*
*
*
*
*************************************************************
*
....Press test number [1-3,0]
Press 1, 2 or 3, and the Enter to perform the corresponding sub test. To quit the Wireless LAN
test program, eject the floppy disk and turn the computer off while the menu above is
displayed.
Satellite Pro M10 Series Maintenance Manual (960-431)
Wireless LAN sub system repair test
1 Transmit & Receive test [Responder]
2 MAC Address test [Mini-PCI Wireless LAN]
3 Wireless LAN (WEP64/128) test
0 Transmit & Receive test [Initiator]
VX.XX
?
3 Tests and Diagnostics
####
*
*
*
*
*
*
*
3-37