Installing The Modem Daughter Card - Toshiba Satellite Pro M10 Series Maintenance Manual

4 Replacement Procedures

Installing the Modem Daughter Card

To install the modem daughter card (MDC), follow the steps below and refer to Figures 4-11
and 4-12.
1. Carefully connect the modem cable to JP1 on the MDC.
2. Seat the MDC and press carefully on the right end of the card to connect it to PJ2017
on the system board. Be careful not to damage the card or connector.
3. Secure the MDC with two M2×4 screws.
4. Seat the CPU/MDC slot cover.
5. Secure the cover with one M2.5×6 black flat-head screw and two M2.5×4 black
flat-head screws.
4-24
4.5 Modem Daughter Card
Satellite Pro M10 Series Maintenance Manual (960-431)