Cd-Rom/Dvd-Rom Test - Toshiba Satellite Pro M10 Series Maintenance Manual

3.14 CD-ROM/DVD-ROM Test

3.14 CD-ROM/DVD-ROM Test
To execute the CD-ROM/DVD-ROM test, select 13 from the DIAGNOSTICS TEST MENU,
press Enter and follow the directions on the screen. The CD-ROM/DVD-ROM test contains
six Subtests that test the computer's CD-ROM/DVD-ROM functions.
Subtest 01 Sequential Read
This Subtest is a sequential reading of one-block units (2K bytes) of all the
logical addresses.
Subtest 02 Read Specified Address
This Subtest reads one-block data from a specified address.
Subtest 03 Random Address/Data
This Subtest reads one-block data and multi-block data from random addresses
200 times.
Subtest 04 Playback Music (CD only)
NOTE: You cannot use the Toshiba-EMI DVD-ROM TEST DISK TSD-1 for Subtest 04. For
this test, use an ordinary music CD.
This Subtest reads track data from a specified track and plays the sound.
Subtest 05 RW 1 point W/R/C
This subtest performs the CD-RW drive test.
NOTE: For the CD-RW drive test, use CD-RW media that supports four-speed writing (media
manufactured by RICOH or Mitsubishi Chemical are recommended.)
Satellite Pro M10 Series Maintenance Manual (960-431)
3 Tests and Diagnostics
3-35