4.6 CPU
4.6
CPU
Removing the CPU
To remove the CPU, follow the steps below and refer to Figures 4-13 and 4-16.
1. Remove one M2.5×6 black flat-head screw and two M2.5×4 black flat-head screw
securing the CPU/MDC slot cover, if necessary.
2. Remove two M2×4 black screws securing the metal brace to remove it.
Satellite Pro M10 Series Maintenance Manual (960-431)
Figure 4-13 Removing the metal brace
4 Replacement Procedures
M2 4 black screws
Metal brace
4-25