Toshiba Satellite Pro M10 Series Maintenance Manual page 168

3 Tests and Diagnostics
Table 3-4 Error codes and error status names (2/3)
Device name
FDD
Printer
ASYNC
HDD
3-62
3.21 Error Code and Error Status Names
Error code
01 Bad Command Error
02 Address Mark Not Found
03 Write Protected
04 Record Not Found
06 Media Removed
08 DMA Overrun Error
09 DMA Boundary Error
10 CRC Error
20 FDC Error
40 Seek Error
60 Not Drive Error
80 Time Out Error
EE Write Buffer Error
01 Time Out
08 Fault
10 Select Line
20 Out Of Paper
40 Power Off
80 Busy Line
01 DSR Off Time Out
02 CTS Off Time Out
04 RX-Empty Time Out
08 TX-BUFFER Full Time Out
10 Parity Error
20 Framing Error
40 Overrun Error
80 Line Status Error
88 Modem Status Error
01 Bad Command Error
02 Address Mark Not Found
04 Record Not Found
05 HDC Not Reset Error
07 Drive Not Initialized
08 HDC Overrun (DRQ)
09 DMA Boundary Error
0A Bad Sector
0B Bad Track Error
10 ECC Error
11 ECC Recover Enable
20 HDC Error
40 Seek Error
80 Time Out Error
AA Drive Not Ready
BB Undefined Error
CC Write Fault
E0 Status Error
EE Access Time Out Error
DA No HDD
Satellite Pro M10 Series Maintenance Manual (960-431)
Error status name