Toshiba Satellite Pro M10 Series Maintenance Manual page 117

3.4 System Test
Subtest 07 DMI read
Reads the factory setting for the serial and DMI numbers.
Model Name
Version Number
Serial Number
Model Number
PCN/BND Number
UUID Number
To exit this subtest and return to the SYSTEM TEST menu, press Enter.
Subtest 08 DMI write
The following messages appear in order. When this subtest is executed. Input
each information. (If you do not replace the PCB, the DMI information should
not be changed.)
1. "
Enter Model Name ?
Input the computer's model name and press Enter. (e.g. DynaBook
Satellite)
2. "
Enter Version Number ?
Input the computer's version number and press Enter. (e.g. PS245U-AAA13)
3. "
Enter Serial Number ?
Input the computer's serial number and press Enter. (e.g. Z2020855JU)
4. "
Enter Model Number ?
Input the computer's sales model number and press Enter. (e.g. PS245U-
AAA13)
5. "
Enter Bundle Number ?
Input the computer's PCN/Bundle number and press Enter. (e.g.
PCN1190CCZ01/S3A1320D990)
6. "
Write data OK (Y/N) ?
When Y is press, the DMI information is written to the Flash-ROM.
Satellite Pro M10 Series Maintenance Manual (960-431)
: XXXXXX
: XXXXXX-XXXXX
: XXXXXXXXXX
: XXXXXX-XXXXX
: XXXXXXXXXXXXXXXXXXXX
: XXXXXXXXXXXXXXXXXXXXXXXXX
" is displayed.
"
"
"
"
"
3 Tests and Diagnostics
3-11