Toshiba Satellite Pro M10 Series Maintenance Manual page 50

2 Troubleshooting Procedures
Does the DC IN LED glow?
Does the Battery LED glow?
Turn the Power Switch on.
Does the DC IN LED flash?
Is an error message displayed?
If the "Password=" message displays,
type the password, then press Enter.
2-4
START
Connect the AC adaptor
to the DC IN socket.
Yes
Yes
No
No
Is the
" TOSHIBA " logo
message displayed?
Yes
Is Toshiba Windows XP
being loaded?
1
Figure 2-1 Troubleshooting flowchart (1/2)
2.2 Troubleshooting Flowchart
Perform the Power Supply
No
Troubleshooting Procedures
in section 2.3.
Perform the Power Supply
No
Troubleshooting Procedures
in section 2.3.
Perform the Power Supply
Yes
Troubleshooting Procedures
in section 2.3.
Perform the System Board
Yes
Troubleshooting
Procedures in section 2.4.
Perform the Display
No
Troubleshooting Procedures
in section 2.8.
Perform the Hard Disk Drive
No
Troubleshooting Procedures
in section 2.6.
Satellite Pro M10 Series Maintenance Manual (960-431)