Installing The Lcd/Fl Cable - Toshiba Satellite Pro M10 Series Maintenance Manual

4 Replacement Procedures
6. Close the display panel.
7. Remove the LCD/FL cable.

Installing the LCD/FL Cable

To install the LCD/FL cable, follow the steps below and refer to Figures 4-54 to 4-56.
1. Route the LCD/FL cable.
2. Seat the metal plate and secure it with one M2.5×6 tapping screw.
3. Set the plastic brace and the metal plate.
4. Seat the plastic cover and secure it with two M2.5×4 black flat-head screws.
4-80
Figure 4-56 Removing the LCD/FL cable
Satellite Pro M10 Series Maintenance Manual (960-431)
4.26 LCD/FL Cable
LCD/FL cable