4.15 Top Cover with Display Assembly
4.15 Top Cover with Display Assembly
Removing the Top Cover with Display Assembly
To remove the top cover with display assembly, follow the steps below and refer to Figures
4-32 to 4-35.
1. Turn the computer upside down.
2. Remove one M2.5×6 black flat-head screw and two M2.5×4 black flat-head screw
securing the CPU/MDC slot cover to remove it, if necessary.
3. Remove the following five screws:
• Two M2.5×16 black flat-head screws
• Three M2.5×6 black flat-head screws
Figure 4-32 Removing the screws from the bottom of the computer
Satellite Pro M10 Series Maintenance Manual (960-431)
M2.5 6 black flat-head screw
M2.5 16 black flat-head screw
M2.5 6 black flat-head screw
4 Replacement Procedures
M2.5 6 black flat-head screw
M2.5 16 black flat-head screw
4-49