Toshiba Satellite Pro M10 Series Maintenance Manual page 145

3.16 Wireless LAN Test (Agere)
When the machine has passed the test, "OK" message will appear in the test machine.
Then press Enter in the target machine; the "OK" message will appear also in the target
machine.
Press Enter to return to the main menu.
Receive test
In receive test reverse the procedures of the transmit test. To prepare the tester machine for the
Wireless LAN test program, insert a floppy disk containing the test program into the tester
machine and turn on the tester machine. The Wireless LAN test menu will appear.
Press 1 to select the test and press Enter. The following message will appear:
#############################################################
####
#############################################################
*
*
*
*
*
*
*
*************************************************************
*
....Press test number [1-2,0]
======== RESPONDER SET ========
ORiWL.EXE Rev.03 Copyright (c) Toshiba Corporation,2000, 2001
Initializing...
[[[ Responder Mode ]]]
MAC address : XXXXXXXXXXXX
Ad-hoc mode
SS ID : PHN Test
Channel : 10
Tx ratio : 2 Mbps
PASS : 134 ERROR : 0
Satellite Pro M10 Series Maintenance Manual (960-431)
Wireless LAN sub system repair test
1 Transmit & Receive test [Responder]
2 MAC Address test [Mini-PCI Wireless LAN]
3 Wireless LAN (WEP64/128) test
0 Transmit & Receive test [Initiator]
VX.XX
?1
3 Tests and Diagnostics
####
*
*
*
*
*
*
*
3-39