Tektronix PHASER 380 User Manual page 199

Front panel messages (cont'd.)
Message
Waiting For Manual
Feed
Waiting For Paper
Waiting For
Transparency
Waste Liner (A) Full
Explanation/Action
Insert paper or transparency in the manual-feed slot.
The print job specifies paper but the printer detects
that the transparency tray is installed. Load paper in
the media tray and press OK
Check that the media selector switch on the side of
the tray is set for Paper.
The print job specifies transparency but the printer
detects that the paper tray is installed. Load
transparency in the media tray and press
Check that the media selector switch on the side of
the tray is set for Transparency.
Open the front cover, remove the maintenance
tray (B) and empty the waste liner (A).
User Manual
Troubleshooting
6
.
OK .
6-7