Tektronix PHASER 380 User Manual page 51

The Finish Installation dialog box contains instructions for
6.
completing the printer software setup; click Next. The Add
Printer Wizard program is automatically launched.
The setup instructions remain visible while the Add Printer
Note
Wizard is running. If you click on the instructions dialog box,
press the <Alt><Esc> keys to see the Add Printer Wizard again.
In the Add Printer Wizard, click Next in the opening dialog box.
7.
Select your printerÕs connection, either Local Printer or
8.
Network Printer, and click Next.
In the Manufacturers/Printers dialog box, click Have Disk.
9.
Type in the drive for the CD-ROM or diskette, and click OK.
10.
Select your printer, and click Next:
11.
Tektronix Phaser 380 (standard printer conÞguration)
Tektronix Phaser 380 Extended (Extended Features option)
If you are not sure which version of the printer you have, check
the printerÕs Startup Page for Extended Features: Yes or No.
Select the port or network queue your printer is connected to, and
12.
click Next.
Enter a name for the printer, and select the Phaser 380 as the
13.
default printer if desired, and click Next.
Decide if you want to print a test page, Yes or No, and click
14.
Finish.
In the Installation Completed dialog box, click Finish.
15.
You may see a Restart Windows dialog box if the system needs to
16.
update some Þles. Decide if you want to restart now or later, and
click OK.
See the ÒAdobe PostScript Printer Driver User GuideÓ on the
Note
printerÕs CD-ROM (USERGUIDE.PDF) for detailed
information on the AdobePS 4 driver.
Getting Set Up
User Manual
2-33
2