Tektronix PHASER 380 User Manual page 106

Printing Basics
3
Phaser 380 Color Printer
3-36
The media tray uses two adjustable, blue-colored
Changing media sizes.
guides to hold paper and transparency media in position. Each guide has
two tabs that operate independently. To adjust a guide, press both tabs at
the same time and slide the guide in or out to position it against the media.
Tab number 1 controls the stop position of the guide at seven Þxed
1.
media sizes: Executive, A4, Letter, Legal, Tabloid, A3 and Tabloid
Maximum.
Tab number 2 controls the stop position of the guide in small
2.
increments for all other (custom) media sizes.
If tab number 1 in the rear of the tray is not locked in one of seven
Note
Þxed-media positions, the printer sees the media as a custom size and
must measure the media during the Þrst print job to determine the
actual media size. Image clipping can occur when the printer
encounters ÒunknownÓ media sizes.
1
2
2
1
9662-64