Locking The Transit Restraint - Tektronix PHASER 380 User Manual

Locking the transit restraint

Refer to the following illustration while performing these steps.
When the printer displays the Ready message or the printerÕs
1.
name, power it down using the rear-panel On/Off switch. The
printer places the printhead in the locking position.
To avoid damaging the printerÕs internal components, always turn
Caution
the printer power off and lock the transit restraint before moving the
printer. Failure to do so may result in damage to the printerÕs
internal components and may invalidate your printerÕs warranty.
Locate the transit restraint on the right side of the printer and
2.
insert a coin into the transit restraint slot.
While pressing inward with medium pressure, turn the transit
3.
restraint slot in a clockwise direction to lock the printhead in
position. The lock button is recessed from the side of the printer
when fully engaged.
Caring for Your Printer
3
2
9662-49
User Manual
5
5-55