Tektronix PHASER 380 User Manual page 58

Getting Set Up
2
LPR port (for TCP/IP) setup instructions
1. In the Print Destinations dialog box, under Available
Print Monitors, select LPR Port and click OK; the
Add LPR compatible printer dialog box appears.
2. For Name or address of server providing lpd, type
your printer's IP address (or Host name if known to
the network).
Note: The printer's IP address may be available on the
printer's Configuration Page. If not, ask your
network administrator.
3. For Name of printer or print queue on that server,
type in one of the following (use uppercase letters):
PS or PostScript
AUTO for automatic selection
4. Click OK.
5. Continue with the instructions in Step 12.
Phaser 380 Color Printer
2-40
In the Create Printer dialog box, under Driver, select Other; the
8.
Install Driver dialog box appears.
Type in the drive for the printerÕs CD-ROM or diskette, for
9.
example D: and click OK.
In the Select Driver dialog box, under Printer Driver, select your
10.
Phaser 380 printer, and click OK:
Tektronix Phaser 380 Extended (Extended Features option)
Tektronix Phaser 380 (standard printer conÞguration)
If you are not sure which version of the printer you have, check
the printerÕs startup page for Extended Features: Yes or No.
In the Create Printer dialog box, select a local printer port, or
11.
follow the instructions below for a network port:
AppleTalk port setup instructions
1. In the Print Destinations dialog box, under Available
Print Monitors, select AppleTalk Printing Devices.
2. Click OK.
3. In the Available AppleTalk Printing Devices dialog
box, double-click on the appropriate zone (if there are
multiple AppleTalk zones).
4. Select your Tektronix printer and click OK.
5. At the prompt: Do you want to capture this
AppleTalk Printing Device? , click No.
Note: Clicking Yes hides the printer from regular
Macintosh users, forcing them to use NT Server as a
spooler, as long as NT Server allows sharing of this
printer.
6. In the Printer Properties dialog box, click OK.
7. Continue with the instructions in Step 12.