Windows 3.1; If You Are Using Pc/Nfs - Tektronix PHASER 380 User Manual

If you are using PC/NFS

If you can't print from Windows to an LPT port
If you have PC/NFS (Personal Computer/Network File System) software
installed on your computer, you need to make the following selection in the
Network Options dialog box:
From the Main window, double-click the Print Manager icon.
1.
From the Options menu in the Print Manager, select
2.
Network Settings.
In the Network Options dialog box, uncheck the
3.
Print Net Jobs Direct box.
Click OK.
4.
Load the PostScript error handler utility; refer to ÒUsing a
PostScript error handlerÓ on page 6-27 for details.

Windows 3.1

If your printer is connected through an LPT (parallel) port and your
document doesnÕt print, try the following:
Double-click the Printers icon in the Control Panel.
1.
In the Printers dialog box, choose your printer from the list of
2.
installed printers.
Click the Connect button; the Connect dialog box appears.
3.
Refer to ÒFixing timeout problems in WindowsÓ on page 6-28 for
4.
instructions on Þxing timeout problems.
Click OK.
5.
You can also try changing your port connection from LPTx to
Note
LPTx.DOS (where x is 1, 2, or 3).
Troubleshooting
User Manual
6-23
6