Tektronix PHASER 380 User Manual page 27

Getting Set Up
2
9662-04
Install the Lower Paper Tray Assembly using these steps:
Remove the paper tray from the Lower Paper Tray Assembly.
1.
To ensure proper printer operation, install the printer and Lower
Note
Paper Tray Assembly on a ßat surface having no more than 2 degrees
of tilt. This is approximately equivalent to lifting one side of the
printer 16 mm (0.625 in.) off a level surface. The operating location
must be capable of safely supporting approximately 136 kg (300 lbs.).
To support this weight, the Printer Station is recommended for use
with the printer and Lower Paper Tray Assembly.
User Manual
2-9