Loading Ink Sticks - Tektronix PHASER 380 User Manual

Loading ink sticks

The printerÕs standard accessories include a box containing one of each color
Phaser 380 ColorStix solid-ink sticks: magenta, cyan, yellow and black.
YouÕll need to load the box of ink sticks during printer set up. To ensure that
your printer is always available for use, immediately reorder and maintain a
stock of each color ink stick. Refer to ÒOrdering printer suppliesÓ on
page 8-2 for ordering information.
Tektronix Phaser 380 ColorStix ink is formulated speciÞcally
Caution
for use with the Phaser 380 printer. To avoid damaging the
printhead, only use Phaser 380 ColorStix solid-ink sticks.
Open the top cover. A color-coded label inside the top cover
1.
corresponds to the color of each ink-loading bin.
Drop the appropriate color Phaser 380 ColorStix ink sticks into
2.
each ink-loading bin. Ink sticks are uniquely shaped to Þt into the
correct ink-loading bin. Add up to three ink sticks for each color.
1
After loading the colored ink sticks, close the top cover.
3.
To ensure optimum printing performance and best ink economy,
Note
leave the printer turned on overnight and during weekends.
Getting Set Up
2
9662-09
User Manual
2-13
2