Specifications - Tektronix PHASER 380 User Manual

Regulatory Information and Specifications
9
Specifications
Phaser 380 Color Printer
9-8
Printer tilt
Place the printer on a level surface with no more than 2¡ tilt in any direction.
Equivalent to raising one corner of the printer approximately 16 mm
(0.625 in.).
Tilting the printer more than 2¡ causes drum ßuid to leak from
Caution
the maintenance tray resulting in damage to your printer not
covered by the printerÕs warranty.
Temperature
Operating: 15¡ C to 35¡ C (59¡ F to 95¡ F)
Nonoperating: Ð30¡ C to +60¡ C (Ð22¡ F to 140¡ F)
Storage: Ð30¡ C to +60¡ C (Ð22¡ F to 140¡ F)
Humidity
Operating: 10% to 80% Relative Humidity, noncondensing
Nonoperating: 10% to 95% Relative Humidity, noncondensing
Altitude
Operating: 0 to 2,400 meters (0 to 8,000 feet)
Nonoperating: 0 to 15,000 meters (0 to 50,000 feet)
Primary voltage ranges
87 Ð 128 VAC, 115 VAC nominal
Frequency range
48 to 66 Hz
AC input ratings
115 VAC, 12 Amps
Print quality and Pages Per Minute (ppm) speed
A4/Letter-size paper
A4/Letter-size transparency
A3/Tabloid Maximum-size paper
Left and right margins for Letter-size media set to 7.3 mm (0.29 in.) or larger.
Tabloid Maximum transparency supported only from the manual-feed slot.
174 Ð 250 VAC, 220 VAC nominal
220 VAC, 6 Amps
Fast Color Standard
mode mode
3.5 ppm 2.5 ppm
Not 1.5 ppm
supported
2.0 ppm 1.3 ppm
Enhanced
mode
1.2 ppm
0.64 ppm
0.6 ppm