Tektronix PHASER 380 User Manual page 178

Caring for Your Printer
5
Phaser 380 Color Printer
5-42
Press the Clean button. The printer displays the following
3.
message:
Clean:Ink Smears
Quick Extended
Press the Quick button. After a short delay during the warm-up
4.
period, the printer begins an automatic sequence of feeding 5
clean sheets of paper from the upper media tray.
A front panel message indicates the number of sheets remaining to
be fed. For example:
Cleaning:Using 5 Sheets
Always use clean sheets of paper to clean the paper path. Do
Caution
not reuse cleaning sheets. Large-format, high-grade paper
heavier than 150 g/m
When the cleaning sequence is complete, inspect the last sheet of
5.
paper fed through the printer. If it is not clean, repeat the cleaning
sequence using the Extended cleaning routine.
The Extended cleaning routine takes approximately 20 minutes
Note
to complete. After a short warm-up period, the printer feeds 10
sheets of paper, then Þnishes the cleaning routine with a short
cool-down period.
Return the printer to normal operation by pressing the Exit
6.
button.
If the ink smears problem persists after running clean sheets of
paper through the paper path, refer to the procedures for cleaning
media feed rollers and the paper exit path. If the ink smears
problem persists after running clean sheets of paper through the
paper path, refer to the procedures for cleaning paper feed rollers
and the paper exit path.
(28 lbs.) works best.
2