Tektronix PHASER 380 User Manual page 141

When you open the front cover, the following message appears:
2.
Waste Liner (A) Full
Remove Tray (B)
Grasp the maintenance tray by the front handles and lift up while
3.
sliding it out of the printer.
You may notice an accumulation of ink, paper dust and drum
ßuid on the maintenance tray blade of a used maintenance tray.
These deposits are normal and do not affect its operation. Refer to
ÒCleaning the maintenance tray blade (optional)Ó on page 5-49 for
more information.
Once the maintenance tray has been partially used, it will leak
Note
drum ßuid if tipped. Place the maintenance tray on a ßat surface
after removing it from the printer. Contact with the waste ink
and drum ßuid poses no known health risk, but can permanently
stain clothing. Refer to ÒMSDS for silicone oilÓ on page 9-6 for
more information.
Caring for Your Printer
9662-29
User Manual
5-5
5