Troubleshooting
6
Phaser 380 Color Printer
6-16
Operational hints (cont'd.)
Hint/Symptom
Ink Low message
appears when ink bins
are full.
Delayed printout.
Printer outputs two prints
after a jam is cleared.
Turn off the Startup
Page.
Maintenance tray is
locked inside printer.
Solution
Apply pressure to each row of ink sticks in the loading bin
to make sure they are not jammed.
See "Printer standby modes" on page 7-8.
Printer is clearing print drum and reprinting image. Refer
to "All about media jams" on page 6-17.
Refer to "Startup Page" on page 7-6.
The printer locks the maintenance tray until it has cooled
down. Wait for a few minutes and try removing it again.