Tektronix PHASER 380 User Manual page 55

Select your printer, and click Next:
12.
Tektronix Phaser 380 (standard printer conÞguration)
Tektronix Phaser 380 Extended (Extended Features option)
If you are not sure which version of the printer you have, check
the printerÕs Startup Page for Extended Features: Yes or No.
Enter a name for the printer, and select the Phaser 380 as the
13.
default printer if desired, and click Next.
Decide if you want to share the printer, Shared or Not shared, and
14.
click Next.
If you are installing drivers for platforms other than Windows NT
4.0, for example Windows 95, a message appears during the
installation procedure asking for the location of printer Þles. If
you see this message, at the prompt, type in the CD-ROM drive
followed by \PPDS95NT.DVR, and click OK. Files are copied to
your hard disk.
If you are installing drivers for Windows NT 3.51 for platforms
other than i386, click Browse to locate the appropriate
subdirectory under \PPDS95NT.DVR\WINNT351 on the printer's
CD-ROM.
Decide if you want to print a test page, Yes or No, and click
15.
Finish.
In the Installation Completed dialog box, click Finish.
16.
You may see a Restart Windows dialog box if the system needs to
17.
update some Þles. Decide if you want to restart now or later, and
click OK.
Getting Set Up
User Manual
2-37
2