Turning On The Printer - Tektronix PHASER 380 User Manual

Turning on the printer

After you have connected the interface cables, you are ready to connect the
power cord and turn on the printer. If you need to turn the printer off, wait
until the display shows Ready or the printerÕs name before powering it
down.
To avoid damaging the printer, make sure that the power
Caution
switch is in the off position before connecting the power cord.
If you move the printer to a location that requires a different type of power
cord, refer to ÒChanging line voltageÓ on page 5-56 for more information.
Plug the power cord into the printer and into a grounded outlet
1.
capable of supplying a minimum of 15 Amps at 115 VAC.
Turn on the printer.
2.
To ensure optimum printing performance and best ink economy,
Note
leave the printer turned on overnight and during weekends. The
printer automatically switches into a standby mode to reduce
power consumption during periods of infrequent use.
1
2
User Manual
Getting Set Up
2
9662-18
2-25