Tektronix PHASER 380 User Manual page 181

To clean the rubber exit rollers from the outside of the printer,
6.
place an alcohol-soaked cleaning cloth against the rubber rollers in
the exit tray (where the prints are ejected). Start from the far left
side of the printer.
While Þrmly holding the cleaning cloth against the exit rollers,
7.
press the Clean button on the front panel to turn the exit rollers.
Move the cleaning cloth to the right to continue cleaning the exit
8.
rollers and repeat Steps 6 and 7. If the cleaning cloth becomes
dirty during cleaning, discard it and use another.
Caring for Your Printer
9662-79
User Manual
5-45
5