Tektronix PHASER 380 User Manual page 161

Grasp the maintenance tray by the front edge and lift up while
3.
sliding it out of the printer. Place the maintenance tray on a level
surface.
Once the maintenance tray has been partially used, it leaks drum
Note
ßuid if tipped. Contact with the drum ßuid poses no known
health risk; refer to ÒMSDS for silicone oilÓ on page 9-6 for more
information.
Locate the top of the media-pick roller behind the black rubber
4.
transport rollers. To clean the top surface of the media-pick roller,
use either the pre-packaged alcohol-soaked cloth or a lint-free
cloth folded into a two-inch square and soaked with alcohol.
Hot surfaces exist behind the upper paper-feed rollers. To avoid
Caution
personal injury during cleaning procedures, do not reach in behind
the paper-feed rollers.
Caring for Your Printer
9662-29
User Manual
5-25
5