Tektronix PHASER 380 User Manual page 171

Press the Clean button. A front panel message prompts you to
3.
install the cleaning tray in the lower paper tray.
Remove the lower paper tray from the printer. Remove all
a.
paper from the paper tray.
Remove the cleaning tray from the cleaning kit and open the
b.
tray lid to reveal the cleaning tray sponge.
Lightly wet the cleaning tray sponge with isopropyl alcohol
c.
( ); a bottle is provided in the cleaning kit for dispensing the
A
alcohol. Alternatively, you can squeeze the alcohol from two
pre-soaked alcohol wipe packets to moisten the cleaning tray
sponge ( ).
B
Do not use rubbing alcohol because it can contain water and
Caution
oils that leave undesirable residue on the printer parts. Never
use water to clean the printerÕs internal components. Failure
to follow these instructions may invalidate your printerÕs
warranty.
A
Caring for Your Printer
B
9662-46
User Manual
5-35
5