Unlocking The Transit Restraint - Tektronix PHASER 380 User Manual

Getting Set Up
2

Unlocking the transit restraint

Phaser 380 Color Printer
2-26
To avoid damaging the printer, always turn the printer power
Caution
on and off using the rear panel On/Off switch. Turn the
printer power on before unlocking the transit restraint.
Turn the printer power on using the rear-panel On/Off switch.
1.
The transit restraint lock is located on the right side of the printer.
2.
Insert a wide ßat-blade screwdriver or large coin into the lock slot.
While pushing inward with slight pressure, turn the lock button
3.
counterclockwise until it springs out ßush with the side of the
printer.
If you move or ship the printer, be sure to lock the transit
Caution
restraint to protect the printhead from damage. Refer to
ÒMoving your printerÓ on page 5-53 for more information.
3
2
9662-06