Previewing With Check Print - Tektronix PHASER 380 User Manual

Previewing with Check Print

This feature is available only with the printerÕs Extended Features option.
When sending a multiple-page Þle to the printer through the driver, you can
select Check Print to preview the Þrst page of the job and determine if the
job is printing as expected before proceeding with the remainder of the job.
This is especially useful when printing a large job.
The ability to access Check Print from the driver is enabled and disabled in
the printerÕs front panel. You can also set the timeout in the front panel (the
timeout is the amount of time the printer will wait after sending the Þrst
page of a Þle, before it continues with the remainder of the job).
By default, access to Check Print is enabled, with a default timeout of
5 minutes. Refer to ÒFront panel menu mapÓ on page 7-5 for information on
navigating the front panel menus.
Use the following instructions to select the Check Print option in the printer
driver:
Select Check Print in a supported driver:
1.
Windows 95 PostScript driver
(AdobePS 4 or Microsoft):
Tektronix driver for Windows 3.1:
Adobe PS3 driver for Windows 3.1:
LaserWriter 8.3.4 driver:
Phaser 380 driver:
Phaser 380 GX driver:
Printing: Beyond the Basics
Select Check Print in the Printer features
field in the Device Options tab.
Select Check Print options in the Tektronix
Printer Features dialog box, available by
clicking the Printer Features button in the
Options dialog box.
Select Check Print in the Features tab.
Select Check Print in the Print Options dialog
box, available by clicking the Options button in
the Print dialog box.
Select Check Print in the TekColor Options
dialog box, available by clicking the TekColor
button in the Print dialog box.
Select Check Print in the TekColor printing
extension in the Print dialog box (or in the
Printer Driver Defaults dialog box available
from the Printing menu).
User Manual
4
4-15