Labels; System Renumbering - AT&T MERLIN LEGEND Release 3.1 System Planning Manual

Numbering the System
To indicate Integrated Voice Power Automated Attendant-IS II, write
IVP-AA
To indicate no voice messaging service, write
4. If the system has AUDIX Voice Power, also write
column for any logical IDs that are being used for fax ports.
5. For each 016 module, if applicable, indicate the Ringing Frequency for
that 016 module. Enter
ports on the 016 module. When configuring a system in the United States
or Canada, generally the 20-Hz setting is applicable. The factory setting
is 20-Hz.
Proceed to the next section, "Labels."

Labels

This section contains instructions to associate alphanumeric labels with
extension numbers so that both the name of the caller and the extension
number appear on display telephones.
Planning Form Instructions
On the appropriate line in the Label column on Form 2a, write the label
(maximum: 7 characters) to be displayed for each telephone.
Proceed to the next section, "System Renumbering."

System Renumbering

The selection of a numbering plan depends on the customer's needs. Each of
the system's three numbering plans allows you to renumber all or selected
extensions. If you do not need to renumber extensions, skip to the last section of
this chapter, "Updating Planning Information."
Before the system is renumbered, the AUDIX Voice Power channel assignments
should be deleted (through AUDIX Voice Power) for the extensions being
renumbered. When the renumbering for the system is complete, AUDIX Voice
Power channels for the renumbered extensions should be added.
Figures 2 2 through 2 4 list the extension numbers according to the three
numbering plans: 2-digit, 3-digit, and Set Up Space. The numbers are arranged
in blocks according to the first digit. The type of equipment or feature they are
assigned is shown in the block. The shaded areas of the table indicate
extension numbers automatically assigned by the system. The unshaded areas
indicate the extension numbers available for reassignment. Use the appropriate
plan-specific instructions that follow to mark Forms 2a and 2b with extension
number assignments.
.
20-Hz or
None .
port in the Voice Mail
25-Hz in the Ring Freq. column for all
Control Unit Configuration
2–27