Data Calls To Digital Stations From Other Locations - AT&T Merlin II Feature Module 2 Data Communications Manual

Data Calls to Digital Stations from Other Locations

PLACING A DATA CALL
DISCONNECTING A DATA
CALL
5-12 Data Calls to Digital Stations from Other Locations
You use incoming modem pools to place data calls to digital stations from
outside your MERLIN II system. For example, you may call the host
computer connected to your company's MERLIN 11 system from your home.
Follow these steps to place a data call to an incoming modem pool:
Select the most appropriate incoming modem pool, if you have more than
1
one. Consult your data information sheet or ask your system
administrator which is the best modem pool for the call.
Dial the telephone number of the incoming modem pool.
2
Your modem generates call progress messages or tones.
When you're connected to the incoming modem pool, follow the same
3
steps you use to place' an internal data call.
To end a data call into your MERLIN II system, follow these steps:
Log off from your keyboard.
1
Perform the procedure you use to disconnect internal data calls.
2
Hang up your telephone or disconnect your computer from the telephone
3
line.