Display - Denon AVR-4520CI Owner's Manual

Display

q
Information display
The input source name, sound mode, setting values and other
information are displayed here.
w
Front speaker indicator
This lights according to the setting of the front A and B speakers.
e
Output signal channel indicators
Lights when audio signals are being output from the speakers.
r
Master volume indicator
t
MUTE indicator
This lights when the mute mode is selected (vpage 42).
y
Sleep timer indicator
This lights when the sleep mode is selected (vpage 105).
DVD
Q2 Q1 Q0 o i
q
u
MULTI ZONE indicators
This lights up when ZONE2, ZONE3 or ZONE4 (separate room)
power is turned on (vpage 113).
i
Monitor output indicator
These light according to the HDMI monitor output setting.
When set to "Auto(Dual)", the indicators light according to
connection status.
o
Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to "HD Radio".
STEREO : In FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
Audyssey ® indicator
Q0
This indicator lights when the "MultEQ ® XT 32"
"Dynamic EQ" (vpage 125),
126), "Audyssey DSX ® "
(vpage (vpage
LFC™" (vpage 126) setting is set to other than "Off".
172
u y t r
w e
Q1
Decoder indicator
These light when Dolby or DTS signals are input or when the Dolby
or DTS decoder is running.
Q2
Input mode indicators
Set the audio input modes for the different input sources
(vpage 138).
(vpage 125),
"Dynamic Volume"
126) or "Audyssey