Surround; Sound Modes And Surround Parameters - Denon AVR-4520CI Owner's Manual

Surround

This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater.

Sound modes and surround parameters

This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode.
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of "Speaker Config." (vpage 142).
Sound Mode (vpage 84)
Front
L/R
DIRECT/PURE DIRECT (2 channel) z1
S
DIRECT/PURE DIRECT (Multi-channel) z1
S
DSD DIRECT (2 channel) z1
S
DSD DIRECT (Multi-channel) z1
S
EXTERNAL IN S
STEREO S
MULTI CH IN S
DOLBY PRO LOGIC gz S
DOLBY PRO LOGIC gx S
DOLBY PRO LOGIC g S
DOLBY PRO LOGIC gx A-DSX S
DOLBY PRO LOGIC g A-DSX S
DTS NEO:X S
Audyssey DSX ®
S
DOLBY DIGITAL S
DOLBY DIGITAL Plus S
DOLBY TrueHD S
DTS SURROUND S
DTS 96/24 S
DTS-HD S
DTS Express S
MULTI CH STEREO S
WIDE SCREEN S
SUPER STADIUM S
ROCK ARENA S
JAZZ CLUB S
CLASSIC CONCERT S
MONO MOVIE S
VIDEO GAME S
MATRIX S
VIRTUAL S
DVD
Channel output
Surround Surround back Front height
Center
L/R L/R L/R
D z2 D z2
D D
D D
D D D
D z4
D D D
D D D D
D D D
D D
D z5
D D D
D z5
D D
D z3 D z3
D D
D z5
D D D
D z4
D D D
D z2 D z2
D D
D z2 D z2
D D
D z4
D D D
D z4
D D D
D z2 D z2
D D
D z4
D D D
D z3 D z3
D D
D z3 D z3
D D
D z3 D z3
D D
D z3 D z3
D D
D z3 D z3
D D
D z3 D z3
D D
D z3 D z3
D D
D z3 D z3
D D
D z3 D z3
D D
Dialog Enhancer Subwoofer Level
Front wide
(vpage 121) (vpage 121)
Subwoofer
L/R
D z7 S z7
D z2
D S
D z7 S z7
D S
D S
D S S
D S S
D S S
D S S
D S S
D z6
D S S
D z6
D S S
D z3
D S S
D z6
D S S
D S S
D z2
D S S
D z2
D S S
D S S
D S S
D z2
D S S
D S S
D z3
D S S
D z3
D S S
D z3
D S S
D z3
D S S
D z3
D S S
D z3
D S S
D z3
D S S
D z3
D S S
D z3
D S S
D S S
184
z1 During playback in PURE DIRECT mode, the surround parameters are
the same as in DIRECT mode.
z2 A signal for each channel contained in an input signal is output as
audio.
z3 You can select speakers to output audio on the "Speaker Select"
(vpage 123) setting in the menu.
z4 Audio is output from the front height speaker when the set sound
mode name contains "+PLgz". For information on how to check the
sound mode, see page 84.
z5 Audio is output from the front height speaker when "Audyssey DSX ® "
(vpage 126) in the menu is set to "Wides/Heights" or "Heights".
z6 Audio is output from the front wide speaker when "Audyssey DSX ® "
(vpage 126) in the menu is set to "Wides/Heights" or "Wides".
z7 Only when "Subwoofer Mode" is set to "LFE+Main" (vpage 144),
sound is output from the subwoofer.
v See overleaf